Actions

Toolpack:Adding a Transcoding Unit A: Difference between revisions

(First version)
 
Line 7: Line 7:




[[New image needed - after adding it to the web profile]]
[[Image:AddTranscodingHardware_Tsbc_0.png]]




Line 29: Line 29:




[[New image needed]]
[[Image:AddTranscodingHardware_Tsbc_1.png]]


4- Verify that the '''Unit was successfully created''' message appears, and that the newly added hardware device appears in the '''Hardware List'''.
4- Verify that the '''Unit was successfully created''' message appears, and that the newly added hardware device appears in the '''Hardware List'''.
Line 35: Line 35:


[[Image:Hardware_4_A.png]]
[[Image:Hardware_4_A.png]]


==List of Parameters==
==List of Parameters==

Revision as of 12:44, 24 October 2017

Applies to version v3.0

To add a transcoding unit:

1- Click Hardware Units in the navigation panel



2- Click Create New Unit, to add a new hardware device



3- Enter information for the following parameters:

  • Enter a name for the hardware device
  • Enter the serial number of the new hardware device (filling in the Serial Number field will cause auto-completion of the field to occur).
  • Select TDM and/or IP from the Type field.
  • Enter the location in which the hardware device is installed.
  • Enter a meaningful description about the use or purpose of the hardware device.
  • Select Enabled from the Target State field.
  • Select the type of TDM lines that the hardware device will support.
  • Leave the Is N+1 Backup field empty.
  • Provide the amount of time in seconds, that the system will wait for calls to complete before shutting down for an upgrade.
  • Click Create


4- Verify that the Unit was successfully created message appears, and that the newly added hardware device appears in the Hardware List.


List of Parameters





Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Adding_a_Transcoding_Unit_A&oldid=23996"