Actions

Toolpack:Creating a SIP Domain SBC A: Difference between revisions

(add missing parameter)
(add missing parameters)
Line 22: Line 22:
* Set the number 'Maximum Registered Users' for this domain
* Set the number 'Maximum Registered Users' for this domain
* Set the Expires value used by SBC when the remote device doesn't supply one ('''Default Contact Expire''')
* Set the Expires value used by SBC when the remote device doesn't supply one ('''Default Contact Expire''')
* Select '''Routing Method'''
* Select '''Routing Method''' the system will use to route sessions.
** '''Register source''': Will use the source IP address to send SIP Invite to
** '''Register source''': Sends SIP Invite to the registering source IP address.
** '''Contact''': Will use the Register 'contact' to send SIP invite to
** '''Contact''': Sends SIP Invite to the 'contact' from the Register message.
* '''Forwarding Mode'''
** '''Contact Remapping''': Changes the user and the IP address.
** '''Contact Passthrough''': Doesn't change anything. Enables devices to be contacted directly without going through the SBC.
* Click '''Create'''
* Click '''Create'''


Revision as of 13:09, 10 May 2017

Applies to version(s): v3.0

A SIP domain represents a grouping of devices (or users) that can communicate with one another. You must configure SIP Registration Domain for your system. The first step in doing so is to create a SIP Domain:


1- Click SIP Domain in the navigation panel


2- Click Create New Domain


3- Create the new Domain:

  • Enter a Name of this configuration
  • Enter a Domain Name for the SIP Registration Domain (domain can be a FQDN or an IP address)
  • Set the number 'Maximum Registered Users' for this domain
  • Set the Expires value used by SBC when the remote device doesn't supply one (Default Contact Expire)
  • Select Routing Method the system will use to route sessions.
    • Register source: Sends SIP Invite to the registering source IP address.
    • Contact: Sends SIP Invite to the 'contact' from the Register message.
  • Forwarding Mode
    • Contact Remapping: Changes the user and the IP address.
    • Contact Passthrough: Doesn't change anything. Enables devices to be contacted directly without going through the SBC.
  • Click Create


4- Verify that the Sip registration domain was successfully created message appears



Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_a_SIP_Domain_SBC_A&oldid=23420"