Actions

Use Cases:Network Configuration IP UseCase4 B: Difference between revisions

(Created page with "=== '''''Applies to version(s): v2.8.''''' === {{DISPLAYTITLE:IP Network Configuration Use Case:Management, Sigtran, Radius and H.248 on tagged vLan, all through VoIP ports, u...")
 
No edit summary
Line 4: Line 4:
__TOC__
__TOC__


== One VLAN: tagged VLAN for management, sigtran, radius and H.248, Untagged subnet for SIP/RTP/ on separate IP, all through VoIP ports ==
== Two VLAN: tagged VLAN for management, sigtran, radius and H.248, Untagged subnet for SIP/RTP/ on separate IP, all through VoIP ports ==


[[File:UseCase_ManagentSigtranRadiusH248onTaggedVlan_ViaVoipport_SIPRTPSepaateIPUntagged_0.png|link=]]
[[File:UseCase_ManagentSigtranRadiusH248onTaggedVlan_ViaVoipport_SIPRTPSepaateIPUntagged_0.png|link=]]

Revision as of 23:57, 25 September 2016

Applies to version(s): v2.8.

Two VLAN: tagged VLAN for management, sigtran, radius and H.248, Untagged subnet for SIP/RTP/ on separate IP, all through VoIP ports

Configure IP Network A Configure IP Network B

Vlan 100 uses tagged bonded over VOIP0 and VOIP1 ports

Subnet B uses untagged bonded over VOIP0 and VOIP1 ports

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 10.0.3.x/24
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.x/24

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: RADIUS_100
    • Radius -> Radius Server
    • Public IP Address: Empty
Retrieved from "https://docs.telcobridges.com/w/index.php?title=Use_Cases:Network_Configuration_IP_UseCase4_B&oldid=21758"