Replace TMG3200 Standalone With Spare: Difference between revisions
(Added version 2.9, added a configuration backup at the start) |
(Updated with link to https://docs.telcobridges.com/tbwiki/3200_Replace_Unit_With_Spare) |
||
| Line 1: | Line 1: | ||
'''Warning: This procedure will require some system downtime.''' | '''Warning: This procedure will require some system downtime.''' | ||
Start with the following steps: [[3200_Replace_Unit_With_Spare|Prepare for replacement]] | |||
The replacement of a standalone TMG3200 is comprised of following steps: | The replacement of a standalone TMG3200 is comprised of following steps: | ||
== Removing the Defective Unit == | == Removing the Defective Unit == | ||
*Shutdown the TMG3200 | *Shutdown the TMG3200 | ||
*Disconnect from the PSTN network | *Disconnect from the PSTN network | ||
Revision as of 11:02, 22 December 2015
Warning: This procedure will require some system downtime.
Start with the following steps: Prepare for replacement
The replacement of a standalone TMG3200 is comprised of following steps:
Removing the Defective Unit
- Shutdown the TMG3200
- Disconnect from the PSTN network
- Disconnect from the VoIP network
- Disconnect from the Management network
- Remove the TMG3200 from the equipment rack
Installing the Replacement Unit
Refer to TMG3200 Installation guide
- Rack-mount the Replacement Unit
- Connect to the Management Interface
- Connect to the VoIP Network
- Connect to the PSTN Network
Starting Up the TMG3200
- Power up the TMG3200
- Configure the Management IP address
- Connect to the web portal: http://[IP address]:12358
- Install the license of the replacement unit
- Upgrade this unit to the same version as the defective unit: Software upgrade
Restoring the configuration to the replacement unit
If a database backup is available,import database using the Web Portal Backup menu:
Configuring the replacement unit
If a database backup is not available, configure the system via the web portal: