Modify RTP and Audio profile A: Difference between revisions
| Line 22: | Line 22: | ||
==List of Parameters== | ==List of Parameters== | ||
Codec | |||
* [[Parameter: G726 AAL2 format|G726 AAL2 format ]] | * [[Parameter: G726 AAL2 format|G726 AAL2 format ]] | ||
* [[Parameter: Initial Depth|Initial Depth ]] | |||
* [[Parameter: Minimum Depth|Minimum Depth ]] | Jitter Buffer | ||
* [[Parameter: Maximum Depth|Maximum Depth ]] | * [[Parameter: Initial Depth|Initial Depth]] | ||
* [[Parameter: Minimum Depth|Minimum Depth]] | |||
* [[Parameter: Maximum Depth|Maximum Depth]] | |||
* [[Parameter: Smooth deletion|Smooth deletion]] | * [[Parameter: Smooth deletion|Smooth deletion]] | ||
TDM Volume Control | |||
* [[Parameter: Tx Gain Level|Tx Gain Level]] | * [[Parameter: Tx Gain Level|Tx Gain Level]] | ||
* [[Parameter: Rx Gain Level|Rx Gain Level]] | * [[Parameter: Rx Gain Level|Rx Gain Level]] | ||
Echo Cancellation | |||
* [[Parameter: Echo Cancellation: Enabled|Enabled]] | * [[Parameter: Echo Cancellation: Enabled|Enabled]] | ||
* [[Parameter: | ]] | * [[Parameter: Gain Power Level|Gain Power Level]] | ||
RTCP | |||
* [[Parameter: RTCP: Enabled|Enabled]] | |||
* [[Parameter: Transmission Interval|Transmission Interval ]] | |||
* [[Parameter: Use XRTCP|Use XRTCP ]] | |||
* [[Parameter: SDES-CNAME|SDES-CNAME]] | |||
Voice Activity Detection | |||
* [[Parameter: Noise floor level|Noise floor level]] | |||
Packet Network | |||
* [[Parameter: Type of Service|Type of Service ]] | |||
* [[Parameter: Packet Loss Concealment|Packet Loss Concealment]] | |||
Revision as of 17:21, 15 November 2012
Applies to version v2.6
To configure RTP and Audio settings, do the following:
1- Click RTP and Audio in the Editing Profile window, to display the customizable options.
2- Modify settings as required.
- Click Save
List of Parameters
Codec
Jitter Buffer
TDM Volume Control
Echo Cancellation
RTCP
Voice Activity Detection
Packet Network