Create Databse Files A: Difference between revisions

Revision as of 16:47, 2 November 2012

Applies to version v2.6

A 1+1 group indentifies the two Tmedia hardware devices that will operate together to provide 1+1 backup protection. One device is identified as the primary hardware device, while the other device is identified as the backup hardware device. To create a 1+1 group, you must use the Tmedia Web Portal.

To create a 1+1 group:

1- Click 1+1 Groups in the navigation panel

2- Enter the name of the file

Click Create

@@ Line 12: / Line 12: @@
-- Click '''Create New 1+1 Group'''
+- Enter the name of the file
+* Click '''Create'''
 [[Image:FileDB_1_A.png]]
-- Enter the serial numbers of the Primary and Backup Hardware devices.
-* Select the '''serial number''' of the primary hardware device. (This field may already be filled.)
-* Select the '''serial number''' of the backup hardware device.
-* Set '''Auto switch-back''' to cause an automatic switch back to the original primary hardware device when it becomes available. If the field is clear (not checked), then a switch back to the original device will occur only after a manual reboot of the system.
-* Click '''Save'''
-[[Image:Create1and1Group_2_A.png]]
-- Verify that the newly added 1+1 group appears in the '''1+1 Groups List'''
-[[Image:Create1and1Group_3_A.png]]