Toolpack:Creating a Service Access Point (SAP) A: Difference between revisions

Latest revision as of 14:29, 9 July 2012

Applies to version(s): v2.5, v2.6.

Now that you have created a SIP stack and a transport server, you must must create a new service access point (SAP) for your configuration. The Service Access Point is used to bind the SIP stack with a transport server. Depending on the system configuration, multiple SAPs can be configured.

To create a new SIP SAP:

1- Click SIP in the navigation panel

2- Click Edit next to the SIP stack for which you wish to create a SAP

3- Click Create New Sap under the Service Access Points menu

4- Create the new service access point:

Enter a name for the SAP
Click Create

5- Verify that the "SipSap was successfully created" message appears

6- Associate the previously created SIP transport server with your new configuration:

Select a transport server from the list of available servers
Associate this configuration by clicking the "<<" button
The transport server will now appear in the list to the left

List of Parameters

Name

@@ Line 1: / Line 1: @@
 === '''''Applies to version(s): v2.5, v2.6.''''' ===
-{{DISPLAYTITLE:Toolpack: Navigating the Web Portal}}
+{{DISPLAYTITLE:Creating a Service Access Point (SAP)}}
 Now that you have created a [[SIP]] stack and a transport server, you must must create a new service access point ([[SAP]]) for your configuration. The Service Access Point is used to bind the SIP stack with a transport server. Depending on the system configuration, multiple SAPs can be configured.