Toolpack v2.5:Creating a New Gateway Configuration: Difference between revisions

Latest revision as of 14:34, 14 July 2010

The Gateway Application is used to bridge 2 call legs, according to a set of routes. The Gateway Application receives incoming calls from toolpack_engine, tries to find a matching route, remaps call parameters if required, and then tells toolpack_engine to generate an outgoing call.

Follow these steps, in order to create a new Gateway configuration:

1. Select Configurations , under Gateway from the navigation panel:

2. Click Create New Configuration:

3. Enter parameters for the configuration:

Enter a name for the new configuration
Enter a bin path for the new configuration
Enter a working path for the new configuration
Click Create

4. Verify that the Gateway configuration was successfully created message appears

@@ Line 14: / Line 14: @@
-. Enter a '''name''' for the new configuration
+. Enter parameters for the configuration:
-. Enter a '''bin path''' for the new configuration
+* Enter a '''name''' for the new configuration
+* Enter a '''bin path''' for the new configuration
-. Enter a working '''path''' for the new configuration
+* Enter a working '''path''' for the new configuration
+* Click '''Create'''
-. Click '''Create''':
 [[File:Toolpack_v2.5_Creating_Gateway_Configuration.png‎]]
-. Verify that the "Gateway configuration was successfully created" message appears:
+. Verify that the '''Gateway configuration was successfully created''' message appears
 [[File:Toolpack_v2.5_Gateway_Configuration_Created.png‎|700px]]