Toolpack:Creating an SCCP Userpart A

The Userpart is the container for the multiple SCCP interfaces. One Userpart is required for each protocol variant.

multiple SCCP userpart can be instantiated within a single SCCP protocol layer. This allows a user application to interface with multiple SS7 SCCP protocol variants at the same time. Only one SCCP userpart is required for a specific variant as it can be assigned to multiple SCCP networks.

A Userpart can easily be seen as a protocol variant that a host application wants to use on the SS7 network.

To Create an SCCP User Part:

1- Click Create New SCCP User Part to access the SCCP configuration window

2- Configure the new SCCP user part

• Enter a name for the user part
• Enter a sub-system number
• Select the first concerned point code
• Select the second concerned point code
• Click Create

3- Verify that the SCCP Userpart was successfully created message appears

4- Set an SCCP Backup Point Code:

• Select a point code from the menu
• Associate it with the SCCP userpart by clicking the "<<" button

File:Toolpack v2.5 SCCP Userpart Point Code.png

• Click Save
• Verify that the SccpUserpart was successfully updated message appears

File:Toolpack v2.5 SCCP Userpart Updated.png