Toolpack v2.4:Create an M3UA Route: Difference between revisions
| Line 7: | Line 7: | ||
'''2. Configure the new M3UA route:''' | '''2. Configure the new M3UA route:''' | ||
*Enter a name for the route | *Enter a name for the route | ||
*Select a route type | *Select a route type: | ||
**Local | |||
**Mtp3 | |||
**Psrv | |||
*Select an M3UA peer server | *Select an M3UA peer server | ||
*Select an M3UA user part | *Select an M3UA user part | ||
*Select a point code | *Select a point code | ||
*Select a point code mask | *Select a point code mask | ||
*Select a sub-service field type | *Select a sub-service field type: | ||
**None | |||
**[[SCCP]] | |||
**[[ISUP]] | |||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
Revision as of 14:34, 9 January 2010
To create an M3UA route:
1. Click "Create New M3ua Route" in the M3UA network configuration window:
2. Configure the new M3UA route:
- Enter a name for the route
- Select a route type:
- Local
- Mtp3
- Psrv
- Select an M3UA peer server
- Select an M3UA user part
- Select a point code
- Select a point code mask
- Select a sub-service field type:
- Click "Create" to finalize the configuration
3. Verify that the "M3ua Route was successfully created" message appears:
