Toolpack v2.4:Create an M3UA Network: Difference between revisions
| Line 7: | Line 7: | ||
'''2. Configure the new M3UA network:''' | '''2. Configure the new M3UA network:''' | ||
*Enter a name for the network | *Enter a name for the network | ||
*Select a protocol type | *Select a protocol type: | ||
*Select a sub-service field | **[[ITU]] | ||
*Select a DPC length | **[[ANSI]] | ||
*Select an SLS range | **[[CHINA]] | ||
**[[TTC]] | |||
*Select a sub-service field: | |||
**International | |||
**National | |||
**National_Reserved | |||
*Select a [[DPC]] length: | |||
**14 bits | |||
**16 bits | |||
**24 bits | |||
*Select an [[SLS]] range: | |||
**4 bits | |||
**5 bits | |||
**8 bits | |||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
Revision as of 14:08, 9 January 2010
To create an M3UA network:
1. Click "Create New M3ua Network" in the M3UA information panel:
2. Configure the new M3UA network:
- Enter a name for the network
- Select a protocol type:
- Select a sub-service field:
- International
- National
- National_Reserved
- Select a DPC length:
- 14 bits
- 16 bits
- 24 bits
- Select an SLS range:
- 4 bits
- 5 bits
- 8 bits
- Click "Create" to finalize the configuration
3. Verify that the "M3ua Network was successfully created" message appears:
