Actions

Toolpack v2.4:Create Line Interfaces: Difference between revisions

(Created page with 'Note: To add a line interface, the Tmedia unit must have a TDM module installed. == To add a line interface == '''1. Select Line Interfaces from the navigation panel.''' [[Im…')
 
Line 3: Line 3:
== To add a line interface ==
== To add a line interface ==


'''1. Select Line Interfaces from the navigation panel.'''
'''1. Select "Line Interfaces" from the navigation panel.'''




[[Image:Navigation_Panel_v2.3_Line_Interfaces.png]]
[[Image:Web_Portal_v2.4_Navigation_Panel_Line_Interfaces.png]]




'''2. Click Create New Line Interface from the Information panel.'''
'''2. Click "Create New Line Interface" from the Information panel.'''




[[Image:Web_Portal_v2.3_Create_New_Line_Interface.png|700px]]
[[Image:Web_Portal_v2.4_Create_Line_Interface.png|700px]]




'''3. To create a T1/E1/J1 line interface''':
'''3. To create a new line interface''':


*Enter a name for the line interface, and set the Line Type
*Enter a name for the line interface, and set the Line Type (this setting will depend on the hardware adapter selected)


*The local indexes for trunks are zero-based values. This means that local index 0 is trunk 1 and local index 1 is trunk 2. Enter a local index number, assigning a different value to each T1/E1/J1 line interface.
*Select a local index number for each line. The local indexes for trunks are zero-based values. This means that local index 0 is trunk 1 and local index 1 is trunk 2. Enter a local index number, assigning a different value to each line interface.


*Enter a local index number, assigning a different index to each T1/E1/J1 line interface.
*Set all necessary parameters for the line type chosen (Line Length, Encoding, Signal Level, etc...)


*Set the Line Length, Encoding and Signal Level
*Click "Create"


*Click Create


 
[[Image:Web_Portal_v2.4_Creating_Line_Interface.png|700px]]
[[Image:Web_Portal_v2.3_Create_New_Line_Interface_2.png|700px]]




Line 34: Line 32:




[[Image:Web_Portal_v2.3_Line_Interface_Created.png|700px]]
[[Image:Web_Portal_v2.4_Line_Interface_Created.png|700px]]




'''4. To view a listing of the line interfaces click List.'''
'''4. To view a listing of the line interfaces click "List".'''




Line 45: Line 43:
The Line Interface List is displayed.
The Line Interface List is displayed.


[[Image:Web_Portal_v2.3_Line_Interface_List.png|700px]]
[[Image:Web_Portal_v2.4_Line_Interface_List.png|700px]]


== Verifying Status ==
== Verifying Status ==

Revision as of 12:31, 6 December 2009

Note: To add a line interface, the Tmedia unit must have a TDM module installed.

To add a line interface

1. Select "Line Interfaces" from the navigation panel.



2. Click "Create New Line Interface" from the Information panel.



3. To create a new line interface:

  • Enter a name for the line interface, and set the Line Type (this setting will depend on the hardware adapter selected)
  • Select a local index number for each line. The local indexes for trunks are zero-based values. This means that local index 0 is trunk 1 and local index 1 is trunk 2. Enter a local index number, assigning a different value to each line interface.
  • Set all necessary parameters for the line type chosen (Line Length, Encoding, Signal Level, etc...)
  • Click "Create"



The 'Line Interface was successfully created' message is displayed.



4. To view a listing of the line interfaces click "List".



The Line Interface List is displayed.

Verifying Status

To verify the status of the line interface, either select Status from the Navigation panel or select the Status tab in the Information panel.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack_v2.4:Create_Line_Interfaces&oldid=4520"