Create NAT Traversal C

This article applies to:	Product	Version
	SBC	3.0, 3.1

One or more NAT traversals can be configured to manage the IP connections traversing network address translation (NAT) gateways.

To configure a NAT traversal

1. Select NATs from the navigation panel.

2. Click Create New NAT Traversal

3. Configure the following fields:

• Enter a name for the NAT Traversal.
• Set the local Nat traversal method to Force public IP.
• Enter the public IP address of the unit.
• Click Create

4. Verify that the NAT Configuration was successfully created message is displayed

List of Parameters

• Name
• Method
• Public Interface