Toolpack:Creating an SCCP Network C: Difference between revisions

Revision as of 08:57, 26 August 2020

Applies to version(s): 2.9, 2.10, 3.0, 3.2

After you create the initial SCCP stack, you must create a new SCCP network for your system.

The SCCP network informs the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3. Based upon your system configuration, one or more SCCP networks are created. Repeat this section for as many networks as you require.

To create an SCCP network:

1- Select SCCP from the navigation panel

2- Click Create New SCCP Network in the SCCP stack configuration window

3- Configure the new SCCP network:

Provide a Name for the SCCP network
Select an MTP3 Network on which to bind the SCCP stack
Select an SCCP Protocol Variant
Select an SCCP Net Indicator Bit
Select a Self Point Code
Click Create

4- Verify that the "SCCP Network was successfully created" message appears

Path

/configurations/@[configuration_name]/sccp_stacks/@[sccp_stack]/sccp_networks/@[sccp_network]

Parameters (text)

/configurations/@[configuration_name]/sccp_stacks/@[sccp_stack]/sccp_networks/@[sccp_network]
m3ua_userpart           = ""
mtp3_network            = "@[mtp3_network]"
name                    = "@[sccp_network]"
net_indicator_bit_type  = "NATIONAL"
protocol_variant        = "ITU"
self_point_code         = "XTEL_OPC_2106"
type_of_network_to_bind = "MTP3"

/configurations/@[configuration_name]/sccp_stacks/@[sccp_stack]/sccp_networks/@[sccp_network]/advanced_parameters
default_hop_count                         = 10
msg_importance_for_priority_0             = 6
msg_importance_for_priority_1             = 6
msg_importance_for_priority_2             = 6
msg_importance_for_priority_3             = 6
use_sio_priorities_msg_importance_mapping = false

/configurations/@[configuration_name]/sccp_stacks/@[sccp_stack]/sccp_networks/@[sccp_network]/timers
asmb_timer       = "30 seconds"
attack_timer     = "100 milliseconds"
congestion_timer = "1 second"
crd_timer        = "1 minute"
decay_timer      = "1 second"
ignore_sst_timer = "30 seconds"
srt_timer        = "30 seconds"
sst_timer        = "30 seconds"

Parameters (json)

{
  "advanced_parameters" : {
    "default_hop_count" : 10,
    "msg_importance_for_priority_0" : 6,
    "msg_importance_for_priority_1" : 6,
    "msg_importance_for_priority_2" : 6,
    "msg_importance_for_priority_3" : 6,
    "use_sio_priorities_msg_importance_mapping" : false
  },
  "m3ua_userpart" : "",
  "mtp3_network" : "@[mtp3_network]",
  "name" : "@[sccp_network]",
  "net_indicator_bit_type" : "NATIONAL",
  "protocol_variant" : "ITU",
  "self_point_code" : "XTEL_OPC_2106",
  "timers" : {
    "asmb_timer" : "30 seconds",
    "attack_timer" : "100 milliseconds",
    "congestion_timer" : "1 second",
    "crd_timer" : "1 minute",
    "decay_timer" : "1 second",
    "ignore_sst_timer" : "30 seconds",
    "srt_timer" : "30 seconds",
    "sst_timer" : "30 seconds"
  }
}

List of Parameters

Timers

Advance Parameters

@@ Line 1: / Line 1: @@
-=== '''''Applies to version(s): v2.9, v2.10, v3.0''''' ===
+=== '''''Applies to version(s): 2.9, 2.10, 3.0, 3.2''''' ===
 {{DISPLAYTITLE:Creating an SCCP Network}}
 After you create the initial SCCP stack, you must create a new SCCP network for your system.
-The [[SCCP]] network tells the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3.
+The [[SCCP]] network informs the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3.
 Based upon your system configuration, one or more SCCP networks are created. Repeat this section for as many networks as you require.