Actions

Use Cases:Network Configuration A: Difference between revisions
(Second usecase settings)
Line 100: Line 100:


|
|
Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports.
Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.
*[[Create Virtual Port]]
 
*[[Create IP Address]]
*Delete voip0 and voip1 virtual port
*Create [[Toolpack:Configuring_Virtual_Port A|VP_VOIP virtual port]]:
**'''Name''': VOIP_UNTAG
**'''vLanId''': Untagged
**'''Physical Ports''': voip0, voip1
 
*Delete voip0 and voip1 IP Address
*Create [[Toolpack:Configuring_VoIP_Interfaces C|VOIP_ADDRESS IP Address]]:
**'''Name''': VOIP_ADDRESS
**'''Virtual Ports''': VP_VOIP
**'''IP Address''': 10.0.3.10 bonded
**'''Netmask''': 255.255.255.0
**'''Services''': RTP, SIP, SIGTRAN
|-
|-
|}
|}
Line 112: Line 124:
|-
|-
|  
|  
*[[Configure SIP]]
*[[Toolpack:Protocol_Stack_Settings_A#SIP|Configure SIP]]
**IP range parameters:
***'''Name''': PORT_RANGE_VOIP
***'''IP Interface''': VOIP_ADDRESS
***'''Minimum Port''': 20000
***'''Maximum Port''': 30000
**SIP transport server parameters:
***'''Port''': 5060
***'''IP Interface''': VOIP_ADDRESS
**SIP NAP parameters:
***'''Proxy Address''': 192.168.4.110
***'''Port Range''': PORT_RANGE_VOIP
 
|  
|  
*[[Toolpack:Protocol_Stack_Settings_A#SS7_ISUP|Configure SIGTRAN]]
*[[Toolpack:Protocol_Stack_Settings_A#SS7_ISUP|Configure SIGTRAN]]
|  
|  
*[[Configure H.248]]
*When you [[Toolpack:Protocol_Stack_Settings_A#H.248 MEGACO|Configure H.248]], set the following:
**'''Local IP Address and Public IP Address''': 192.168.4.210
[Public IP or NAT public IP]
|  
|  
*[[Configure RADIUS]]
*When you [[Toolpack:CDR_Settings_A|Configure RADIUS]], set the following:
**'''Source IP interface''': Any
**'''Radius -> Radius Server'''
**'''Public IP Address''': Empty
|}
|}
|}
|}

Revision as of 10:36, 28 April 2015

Applies to version(s): v2.8.

This article provides the steps required to complete the most common IP network configurations using the Web Portal.

One subnet, Two IP Addresses, Untagged

Configure IP Network A Configure IP Network B
  • Subnet A is access through MGMT0
  • MGMT0 network interface modification requires the use of the tbchangeip shell script
  • Use tbchangeip with the following parameters:
    • IP Address: 192.168.4.10
    • Netmask: 255.255.255.0
    • Default gateway: 192.168.4.1

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

  • Delete voip0 and voip1 virtual port
  • Create VP_VOIP virtual port:
    • Name: VP_VOIP
    • vLanId: Untagged
    • Physical Ports: voip0, voip1


  • Delete voip0 and voip1 IP Address
  • Create VOIP_ADDRESS IP Address:
    • Name: VOIP_ADDRESS
    • Virtual Ports: VP_VOIP
    • IP Address: 192.168.4.20
    • Netmask: 255.255.255.0
    • Services: RTP, SIP, SIGTRAN
Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 192.168.4.110
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: Any
    • Radius -> Radius Server
    • Public IP Address: Empty

Two subnets, One IP per subnet, untagged


Configure IP Network A Configure IP Network B
  • Subnet A is access through MGMT0
  • MGMT0 network interface modification requires the use of the tbchangeip shell script
  • Use tbchangeip with the following parameters:
    • IP Address: 192.168.4.10
    • Netmask: 255.255.255.0
    • Default gateway: 192.168.4.1

Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.

  • Delete voip0 and voip1 virtual port
  • Create VP_VOIP virtual port:
    • Name: VOIP_UNTAG
    • vLanId: Untagged
    • Physical Ports: voip0, voip1
  • Delete voip0 and voip1 IP Address
  • Create VOIP_ADDRESS IP Address:
    • Name: VOIP_ADDRESS
    • Virtual Ports: VP_VOIP
    • IP Address: 10.0.3.10 bonded
    • Netmask: 255.255.255.0
    • Services: RTP, SIP, SIGTRAN
Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
  • Configure SIP
    • IP range parameters:
      • Name: PORT_RANGE_VOIP
      • IP Interface: VOIP_ADDRESS
      • Minimum Port: 20000
      • Maximum Port: 30000
    • SIP transport server parameters:
      • Port: 5060
      • IP Interface: VOIP_ADDRESS
    • SIP NAP parameters:
      • Proxy Address: 192.168.4.110
      • Port Range: PORT_RANGE_VOIP
  • When you Configure H.248, set the following:
    • Local IP Address and Public IP Address: 192.168.4.210

[Public IP or NAT public IP]

  • When you Configure RADIUS, set the following:
    • Source IP interface: Any
    • Radius -> Radius Server
    • Public IP Address: Empty

Two VLAN, Three IP Address, tagged


Configure IP Network A Configure IP Network B

Subnet B uses untag bonded over VOIP0 and VOIP1 ports

Configure SIP Configure SIGTRAN Configure H.248 Configure RADIUS
Retrieved from "https://docs.telcobridges.com/w/index.php?title=Use_Cases:Network_Configuration_A&oldid=18259"