|
|
| Line 21: |
Line 21: |
| Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. | | Subnet B is untagged and bonded over VOIP0 and VOIP1 ports. |
|
| |
|
| When you are *[[Toolpack:Configuring_Virtual_Port A|creating an IP virtual port]], configure it as follows: | | When you [[Toolpack:Configuring_Virtual_Port A|Create an IP Virtual Port]], configure it as follows: |
| *Name: vp VOIP U | | *Name: vp VOIP U |
| *vLanId: Untagged | | *vLanId: Untagged |
| *Physical Ports: voip0, voip1 | | *Physical Ports: voip0, voip1 |
| *[[Create Virtual Port]]
| |
|
| |
|
| *[[Create IP Address]]
| | When you [[Toolpack:Configuring_VoIP_Interfaces C|Create an IP Address]], configure it as follows: |
| | *Name: VOIP_UNTAG |
| | *Virtual Ports: vp VOIP U |
| | IP Address: x.x.x.y |
| | Services: RTP, SIP, SIGTRAN |
| | |
| |- | | |- |
| |} | | |} |
Revision as of 15:43, 23 April 2015
Applies to version(s): v2.8.
This article provides the steps required to complete the most common IP network configurations using the Web Portal.
One subnet, Two IP Addresses, Untagged
| Configure IP Network A
|
Configure IP Network B
|
|
Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.
|
Subnet B is untagged and bonded over VOIP0 and VOIP1 ports.
When you Create an IP Virtual Port, configure it as follows:
- Name: vp VOIP U
- vLanId: Untagged
- Physical Ports: voip0, voip1
When you Create an IP Address, configure it as follows:
- Name: VOIP_UNTAG
- Virtual Ports: vp VOIP U
IP Address: x.x.x.y
Services: RTP, SIP, SIGTRAN
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
Two subnets, One IP per subnet, untagged
[image of network configuration 2]
| Configure IP Network A
|
Configure IP Network B
|
|
Subnet A uses the MGMT0 network interface; because it is untagged its IP can only be configured with the tbchangeip command on the SSH port.
|
Subnet B is untagged and is bonded over VOIP0 and VOIP1 ports.
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
Two VLAN, Three IP Address, tagged
[image of network configuration 3]
| Configure IP Network A
|
Configure IP Network B
|
|
|
Subnet B uses untag bonded over VOIP0 and VOIP1 ports
|
| Configure SIP
|
Configure SIGTRAN
|
Configure H.248
|
Configure RADIUS
|
|
|
|
|
|
|
