Actions

Toolpack:Creating an SCCP Route B: Difference between revisions

(New 2.8 artilce)
 
(New 2.8 article)
Line 7: Line 7:




- Select '''SCCP''' from the navigation panel
1- Select '''SCCP''' from the navigation panel




Line 19: Line 19:




3- Click '''Create new Sccp Route''' in the SCCP LSAP configuration window
3- Select an SCCP LSAP


[[Image:Toolpack_v2.5_Create_SCCP_Route.png]]


[[Image:Select_SCCP_LSAP_0.png]]


4- Configure the new SCCP Route:
 
4- Click '''Create new Sccp Route''' in the SCCP LSAP configuration window
 
[[Image:Create_SCCP_Route_0.png]]
 
 
5- Configure the new SCCP Route:


* Choose a [[Parameter: Name|Name]] for the new route
* Choose a [[Parameter: Name|Name]] for the new route
Line 33: Line 39:
* Click '''Create'''
* Click '''Create'''


[[Image:Toolpack_v2.5_Creating_SCCP_Route.png]]
[[Image:Create_SCCP_Route_1.png]]




5- Verify that the '''"SccpRoute was successfully created"''' message appears
6- Verify that the '''"SccpRoute was successfully created"''' message appears


[[Image:Toolpack_v2.5_SCCP_Route_Created.png]]
[[Image:Create_SCCP_Route_2.png]]




6- Configure [[SCCP Route Backup Point Code]]
7- Configure [[SCCP Route Backup Point Code]]


* Assign [[Parameter: SCCP Backup Point Code| Backup Point Codes]] to use in case this route's [[DPC]] is not available.   
* Assign [[Parameter: SCCP Backup Point Code| Backup Point Codes]] to use in case this route's [[DPC]] is not available.   
[[Image:SCCP_Route_Backup_PC.png]]
 
[[Image:Create_SCCP_Route_3.png]]


* '''Note: For each selected point codes, a valid SCCP route must be exist'''.
* '''Note: For each selected point codes, a valid SCCP route must be exist'''.

Revision as of 13:33, 26 September 2014

Applies to version(s): v2.8

Now that you have created an SCCP LSAP, you must create a new SCCP route for your system. This step in the Web Portal configuration exists to create a route to a specific destination point code (DPC).

To Create an SCCP Route:


1- Select SCCP from the navigation panel



2- Select an SCCP Network



3- Select an SCCP LSAP



4- Click Create new Sccp Route in the SCCP LSAP configuration window


5- Configure the new SCCP Route:


6- Verify that the "SccpRoute was successfully created" message appears


7- Configure SCCP Route Backup Point Code

  • Note: For each selected point codes, a valid SCCP route must be exist.


List of Parameters

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_an_SCCP_Route_B&oldid=16566"