Toolpack:Defining a Clocking Source C: Difference between revisions

Revision as of 10:17, 25 August 2014

Applies to version(s): v2.8.

A network clock is a necessary component of a TDM network. Synchronizing your system to a clock will ensure that a good condition of your system is maintained. It is recommended that you configure an external clocking source for your system.

To configure a clock:

1- Click Clocking in the navigation panel

2- Click Create New External System Clock Reference

3- Create the new clocking source:

Enter a name for the clock.
Select the appropriate hardware adapter
Select a clock reference type
Select a clock reference source

Note: In this example, Line Service is selected as the reference type, and a line service is selected as the clocking source.

4- Verify that the System Clock was successfully created message appears, and that the new clocking source appears in the External System Clock Reference List

@@ Line 18: / Line 18: @@
 - Create the new clocking source:
+* Enter a name for the clock.
 * Select the appropriate hardware '''adapter'''
-* Select a '''clock reference type''' (in this example, Line Service is selected)
+* Select a '''clock reference type'''
-* Select a '''clock reference source''' (in this example "Line_Service_00")
+* Select a '''clock reference source'''
-'''Note:''' In this example, '''Line Service''' is selected chosen as the reference type, and a line service is selected as the clocking source.
+'''Note:''' In this example, '''Line Service''' is selected as the reference type, and a line service is selected as the clocking source.
-To
-[[Image:CreateSystemClock_2.png]]
+[[Image:CreateSystemClock_3.png]]
 - Verify that the '''System Clock was successfully created''' message appears, and that the new clocking source appears in the '''External System Clock Reference List'''
-[[Image:CreateSystemClock_3.png]]
+[[Image:CreateSystemClock_2.png]]
 ==List of Parameters==