Configure Fax T38 A: Difference between revisions

Revision as of 11:12, 22 July 2013

To enable T.38: 1. Select Profiles from the navigation menu.

2. Set Enable Fax/Modem Relay to enabled.

3. Set Detection Mode to Standard.

4. Set Relay Mode to T.38.

5. Uncheck the Use V.34 option. (For reliability reason, some faxes failed to failback to V17)

@@ Line 2: / Line 2: @@
 {{DISPLAYTITLE:Configure Fax T38}}
-To enable T.38, follow these steps:
+'''To enable T.38:'''
-<pre>
+. Select '''Profiles''' from the navigation menu.
-. Make sure "Enable Fax/Modem Relay" is enabled.
-. Make sure "Detection Mode" is Standard.
+[[Image:Profiles_0.png]]
-. Make sure "Relay Mode" is T.38.
-. Make sure the Use V.34 is unchecked. (For reliability reason, some faxes failed to failback to V17)
+. Set '''Enable Fax/Modem Relay''' to enabled.
-</pre>
+. Set '''Detection Mode''' to Standard.
+. Set '''Relay Mode''' to T.38.
+. Uncheck the '''Use V.34''' option. (For reliability reason, some faxes failed to failback to V17)
 [[Image:profile_t38_v27.png]]