Toolpack:Creating an M3UA Route (SGP) A: Difference between revisions

Latest revision as of 15:19, 2 July 2014

Applies to version(s): v2.5, v2.6, v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an M3UA route on an SGP:

1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

Enter a name for the route
Select a route type:Psrv
Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
Select an M3UA user part:NONE
Select a point code: Select the OPC from the MTP3 linkset
Select a point code mask (Recommended value: Exact match)
Select a sub-service field type:ISUP or SCCP
Click Create

For DPC: This route is used to reach the DPC used in MTP3 configuration.

Enter a name for the route
Select a route type:Mtp3
Select an M3UA user part: Select the previously configured M3UA User Part
Select a point code: Select the DPC from the MTP3 linkset
Select a point code mask (Recommended value: Exact match)
Select a sub-service field type:ISUP or SCCP
Click Create

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters

Name
Route Type
M3UA Peer Server (only if Psrv was chosen as the route type)
M3UA Userpart
Point Code
Point Code Mask
Sub-Service Field Type

@@ Line 1: / Line 1: @@
-Now that you have configured M3UA user parts, PSPs, and peer servers, you must create an M3UA route for your system.
+=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
+{{DISPLAYTITLE:Creating an M3UA Route (SGP)}}
+Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.
+You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).
 To create an M3UA route on an SGP:
@@ Line 9: / Line 14: @@
 - Configure the new M3UA route:
+'''For OPC: This route is used for local point code and to reach the ASP.'''
+* Enter a '''name''' for the route
+* Select a '''route type''':Psrv
+* Select an '''M3UA peer server''': Select the previously configured M3US Peer Server with the right RC
+* Select an '''M3UA user part''':NONE
+* Select a '''point code''': Select the OPC from the MTP3 linkset
+* Select a '''point code mask''' (Recommended value: Exact match)
+* Select a '''sub-service field type''':ISUP or SCCP
+* Click '''Create'''
+[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_OPC.png]]
+'''For DPC: This route is used to reach the DPC used in MTP3 configuration.'''
 * Enter a '''name''' for the route
-* Select a '''route type'''
+* Select a '''route type''':Mtp3
-* Select an '''M3UA peer server''' (choose Remote Peer server, if associated with an [[OPC]], select NONE, if using [[DPC]])
+* Select an '''M3UA user part''': Select the previously configured M3UA User Part
-* Select an '''M3UA user part''' (if associated with a [[DPC]], select NONE for [[OPC]])
+* Select a '''point code''': Select the DPC from the MTP3 linkset
-* Select a '''point code'''
 * Select a '''point code mask''' (Recommended value: Exact match)
-* Select a '''sub-service field type'''
+* Select a '''sub-service field type''':ISUP or SCCP
 * Click '''Create'''
-[[Image:Toolpack_v2.5_Creating_M3UA_Route.png]]
+[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_DPC.png]]
 - Verify that the '''"M3ua Route was successfully created"''' message appears