Toolpack:Creating an M2PA SAP A: Difference between revisions

Latest revision as of 10:56, 15 July 2013

Applies to version(s): v2.5, v2.6.

Now that you have created an M2PA configuration, you must create a new M2PA service access point (SAP) for your system. The SAP is an identifying label for endpoints in your network.

To create a new M2PA SAP:

1- Select M2PA from the navigation panel

2- Click Create new M2pa Sap

3- Configure the new M2PA SAP:

Enter a name for the SAP
Enter an SCTP source port for the SAP
Click Create

4- Verify that the "M2pa Sap was successfully created" message appears

5- Associate IP interfaces

Select an IP interface from the list in the information panel
Click the "<<" button to add the selected IP interface. This is the outgoing route from the hardware adapter.

@@ Line 1: / Line 1: @@
-To create a new M2PA service access point (SAP):
+=== '''''Applies to version(s): v2.5, v2.6.''''' ===
+{{DISPLAYTITLE:Creating an M2PA SAP}}
+Now that you have created an M2PA configuration, you must create a new M2PA service access point (SAP) for your system. The SAP is an identifying label for endpoints in your network.
+To create a new M2PA SAP:
 - Select '''M2PA''' from the navigation panel
@@ Line 17: / Line 22: @@
 [[Image:Toolpack_v2.5_Creating_M2PA_SAP.png]]
-- Verify that the '''M2pa Sap was successfully created''' message appears
+- Verify that the '''"M2pa Sap was successfully created"''' message appears
 [[Image:Toolpack_v2.5_M2PA_SAP_Created.png]]
@@ Line 27: / Line 32: @@
 [[Image:Toolpack_v2.5_M2PA_SAP_IP_Interface.png]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: SCTP Source Port|SCTP Source Port]]