Toolpack v2.4:Create an MTP3 Route: Difference between revisions

Latest revision as of 16:09, 8 February 2010

MTP3 routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.

To create an MTP3 route:

1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:

2. Configure the new MTP3 route:

Enter a name for the route
Select a point code for the route
Select a restart procedure:
- None
- ITU88
- ITU92
- ANSI
Select a point type:
- SP (Signalling Point)
- STP (Signal Transfer Point)
Check Route to Adjacent, if this route is to the adjacent network
Click "Create" to finalize the configuration

3. Verify that the "Mtp3Route was successfully created" message appears:

4. Associate the newly created route with a linkset:

Select a linkset from the list provided at the bottom of the route configuration window
Click the "<<" button to associate the linkset with the newly created route

@@ Line 1: / Line 1: @@
-==To create an MTP3 route:==
+[[MTP3]] routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.
-'''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:'''
+== To create an MTP3 route: ==
-[[Image:Web_Portal_v2.4_Create_MTP3_Route.png|700px]]
+'''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:'''
-'''2. Configure the new MTP3 route:'''
+[[Image:Web Portal v2.4 Create MTP3 Route.png|700px]]
-*Enter a name for the route
-*Select a point code for the route
-*Click "Create" to finalise the configuration
-[[Image:Web_Portal_v2.4_Creating_MTP3_Route.png|700px]]
+'''2. Configure the new MTP3 route:'''
-'''3. Verify that the "Mtp3Route was successfully created" message appears:'''
+*Enter a name for the route
+*Select a point code for the route
+*Select a restart procedure:
+**None
+**ITU88
+**ITU92
+**[[ANSI]]
+*Select a point type:
+**SP (Signalling Point)
+**STP (Signal Transfer Point)
+*Check Route to Adjacent, if this route is to the adjacent network
+*Click "Create" to finalize the configuration
-[[Image:Web_Portal_v2.4_MTP3_Route_Created.png|700px]]
+[[Image:Web Portal v2.4 Creating MTP3 Route.png|700px]]
-'''4. Associate the newly created route with a linkset:'''
+'''3. Verify that the "Mtp3Route was successfully created" message appears:'''
-*Select a linkset from the list provided at the bottom of the route configuration window
-*Click the "<<" button to associate the linkset with the newly created route
-[[Image:Web_Portal_v2.4_MTP3_Route_Linkset.png|700px]]
+[[Image:Web Portal v2.4 MTP3 Route Created.png|700px]]
+'''4. Associate the newly created route with a linkset:'''
+*Select a linkset from the list provided at the bottom of the route configuration window
+*Click the "&lt;&lt;" button to associate the linkset with the newly created route
+[[Image:Web Portal v2.4 MTP3 Route Linkset.png|700px]]