Actions

Toolpack:Configuring IP Interfaces v2.3: Difference between revisions
(Added : Note: the IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets)
 
Line 5: Line 5:
*Gateway
*Gateway


== To configure a VoIP0 or VoIP1 port ==
== To configure a VoIP0 or VoIP1 port ==


'''1. Select IP Interfaces from the navigation panel.'''
'''1. Select IP Interfaces from the navigation panel.'''  


<br> [[Image:Configuring IP Interfaces V2.3 0.jpg|150px]]


[[Image:Configuring_IP_Interfaces_V2.3_0.jpg|150px]]
<br> '''2. Click 'Edit' from the IP Interfaces Information panel.'''


<br> [[Image:Configuring IP Interfaces V2.3 1.jpg|600px]]


'''2. Click 'Edit' from the IP Interfaces Information panel.'''
<br> '''3. Enter an IP address, a Netmask, and a gateway address.'''  


*


[[Image:Configuring_IP_Interfaces_V2.3_1.jpg|600px| ]]
''Note:&nbsp;the IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets''


<br> [[Image:Configuring IP Interfaces V2.3 2.jpg|600px]]


'''3. Enter an IP address, a Netmask, and  a gateway address.
<br> '''4. The changes are displayed in the IP interfaces information panel.'''
*Click Save" to save the changes.


 
<br> [[Image:Configuring IP Interfaces V2.3 3.jpg|600px]]  
[[Image:Configuring_IP_Interfaces_V2.3_2.jpg|600px| ]]
 
 
'''4. The changes are displayed in the IP interfaces information panel.'''
 
 
[[Image:Configuring_IP_Interfaces_V2.3_3.jpg|600px| ]]


'''Note''': To apply the IP configuration change, activate the current configuration, and then reboot the adapter.
'''Note''': To apply the IP configuration change, activate the current configuration, and then reboot the adapter.

Latest revision as of 14:24, 31 March 2010

The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:

  • IP Address
  • Netmask
  • Gateway

To configure a VoIP0 or VoIP1 port

1. Select IP Interfaces from the navigation panel.



2. Click 'Edit' from the IP Interfaces Information panel.



3. Enter an IP address, a Netmask, and a gateway address.

Note: the IP addresses of ETH0, ETH1, VOIP0 and VOIP1 must be on different subnets



4. The changes are displayed in the IP interfaces information panel.


Note: To apply the IP configuration change, activate the current configuration, and then reboot the adapter.

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Configuring_IP_Interfaces_v2.3&oldid=5743"