Adding capture dtmf script

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.1

This arcticle describes how to add a Capture DTMF script to any Routing script.

Script Description

If the called number is a specific value, it will play an announcement and wait to capture digits.

1. Call 1-800-999-4444
2. Hear tone
3. Enter 2 digit switch number optionally followed by #
4. Hear tone
5. Enter TG number – can be 4 or 5 digits depending on which switch the call goes to
6. Hear tone
7. Enter destination number

The call then routes to a TG (NAP) based on the 2-digit switch number, and the INVITE contains the TG number in the TGRP= parameter. Sample INVITE with TGRP=

 INVITE sip:18003608022@192.168.101.180;tgrp=98741 SIP/2.0

This will work with any TMG device with a license to play files. For ProSBC, it requires transcoding devices.

Add Capture DTMF Scripts in system

Download this file:

Capture DTMF Script
capture_dtmf.rb

Then upload it in the system with these instructions: Import_Customized_Routing_Script_C

Setting up Capture DTMF Scripts

To set up a Filter, the main script needs to be modified. The main script can be either simple_routing.rb, simple_routing_sbc.rb, or any other script.

First, go to the routing script section of the Web portal

Gateway -> Routing scripts -> Example Scripts -> simple_routing.rb [Edit]

Three things need to be added. At the start of the script:

require 'capture_dtmf'

In the main class:

include CaptureDTMF

after_filter :method => :capture_dtmf

The final script will look like this:

require 'base_routing'
require 'capture_dtmf'

class SimpleRouting < BaseRouting
  include CaptureDTMF
  
  route_match :call_field_name => :called
  route_match :call_field_name => :calling
  route_match :call_field_name => :nap
  route_remap :call_field_name => :called, :route_field_name => :remapped_called
  route_remap :call_field_name => :calling, :route_field_name => :remapped_calling
  route_remap :call_field_name => :nap, :route_field_name => :remapped_nap

  after_filter :method => :capture_dtmf
end

Upload audio file
The script will play a tone for the user to ask them to enter a dtmf string. This show how to add the default one which can be downloaded here:

Sample Tone File
fen-tone-400hz-300ms.wav

1. Click Audio Prompts in the navigation panel
2. Click Browse and select 'fen-tone-400hz-300ms.wav'
3. Click Upload

See instructions here: Toolpack:Configuring_Audio_Prompts_C
However any G.711 alaw or G.711 ulaw wav file can be added to the system to be played: you need to edit the capture_dtmf.rb script with the appropriate wav file.