Toolpack:Creating a N+1 Patch Panel B: Difference between revisions

Latest revision as of 12:05, 4 June 2015

Applies to version v2.8

One or two N+1 patch panels can be used to provide backup protection for the system.

To create an N+1 Patch Panel:

1- Click Hardware Units in the navigation panel

2- Click Create New Unit

3- Enter the name of the patch panel.

Enter the serial number of the patch panel.
Select N+1 Patch Panel as the type.
Enter the location of the device.
Enter a meaningful description for the device.
Click Create

NOTE: If your system is configured with a main and a backup patch panel, repeat steps 2 and 3 to add another N+1 patch panel. The following image shows a backup N+1 panel being added.

4- Verify that the newly added N+1 patch panel(s) appear in the N+1 Patch Panels list.

@@ Line 2: / Line 2: @@
 {{DISPLAYTITLE:Creating an N+1 Patch Panel}}
-N+1 indentifies the N+1 patch panel providing backup protection.  To assign a device as the N+1 patch panel, you must use the Tmedia [[Web Portal]].
+One or two N+1 patch panels can be used to provide backup protection for the system.
 '''To create an N+1 Patch Panel:'''
@@ Line 25: / Line 25: @@
 * Click '''Create'''
+[[Image:Nplus1_2_A.png]]
-[[Image:Nplus1_2_A.png]]
+NOTE: If your system is configured with a main and a backup patch panel, repeat steps 2 and 3 to add another N+1 patch panel. The following image shows a backup N+1 panel being added.
+[[Image:Nplus1_2_B.png]]
-- Verify that the newly added N+1 patch panel appears in the '''N+1 Patch Panels''' list.
+- Verify that the newly added N+1 patch panel(s) appear in the '''N+1 Patch Panels''' list.
 [[Image:Nplus1_3_A.png]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: Serial|Serial]]
+* [[Parameter: Adapter Type|Type]]
+* [[Parameter: Location|Location]]
+* [[Parameter: Description|Description]]
+* [[Parameter: Target State|Target State]]