Modify Fax Relay Profile B: Difference between revisions

Latest revision as of 11:58, 6 November 2014

Applies to versions: 2.6, v2.7

To configure FAX Relay settings, do the following:

1- Click Fax Relay in the Editing Profile window, to display the customizable options.

2- Modify settings as required.

3- To configure NSE, check the Use NSE checkbox.

NOTE:

If NSE exchange is possible (negociated in the SDP), the switch to passthrough will happen in the RTP stream and no longer wiil occur with a SIP re-INVITE. This implementation of NSE currently only supports a switch to passthrough, which means that you can have NSE packets switching to T.38.

Click Save

List of Parameters

Fax/Modem Relay

T.38 Parameters

Fax/Modem Pass-through Parameters

@@ Line 1: / Line 1: @@
-To configure NSE, you must go in your profile.
+=== '''''Applies to versions: 2.6, v2.7''''' ===
-You simply have to check "Use NSE", like:
+{{DISPLAYTITLE:Modifying FAX Relay Profile Settings}}
+<br>
+'''To configure FAX Relay settings, do the following:'''
+<br>
+- Click '''Fax Relay''' in the Editing Profile window, to display the customizable options.
+[[Image:ModifyVoipFaxRelay_0_A.png]]
+- Modify settings as required.
 [[File:fax_modem_relay_nse.png]]
+- To configure NSE, check the '''Use NSE''' checkbox.
+'''NOTE:'''
-If NSE exchange is possible (negociated in the SDP), the switch to passthrough will happen in the RTP stream, not with a SIP re-INVITE anymore.
+If NSE exchange is possible (negociated in the SDP), the switch to passthrough will happen in the RTP stream and no longer wiil occur with a SIP re-INVITE. This implementation of NSE currently only supports a switch to passthrough, which means that you can have NSE packets switching to T.38.
+* Click '''Save'''
-Note:
+==List of Parameters==
-Our implementation of NSE currently only support switch to passthrough, which means you can exchange NSE packets to switch to T.38.
+Fax/Modem Relay
+* [[Parameter: Fax Modem Relay: Enable Fax/Modem Relay|Fax Modem Relay:Enable Fax/Modem Relay]]
+* [[Parameter: Fax Modem Relay: Detection Mode|Fax Modem Relay: Detection Mode]]
+* [[Parameter: Fax Modem Relay: Relay Mode|Fax Modem Relay: Relay Mode]]
+* [[Parameter: Fax Modem Relay: Modem vs. Fax distinction timeout|Fax Modem Relay: Modem vs. Fax distinction timeout]]
+* [[Parameter: Fax Modem Relay: Fax/Modem tones detection duration|Fax Modem Relay: Fax/Modem tones detection duration]]
+* [[Parameter: Fax Modem Relay: Enable early Fax/Modem tone detection|Fax Modem Relay: Enable early Fax/Modem tone detection]]
+* [[Parameter: Fax Modem Relay: Enable switching to FAX relay upon CNG tone|Fax Modem Relay: Enable switching to FAX relay upon CNG tone]]
+<br>
+T.38 Parameters
+* [[Parameter: T.38 Parameters: Use V.34| T.38 Parameters: Use V.34]]
+* [[Parameter: T.38 Parameters: Maximum Bit Rate| T.38 Parameters: Maximum Bit Rate]]
+* [[Parameter: T.38 Parameters: Fill Bit Removal| T.38 Parameters: Fill Bit Removal]]
+* [[Parameter: T.38 Parameters: Redundancy Count| T.38 Parameters: Redundancy Count]]
+* [[Parameter: T.38 Parameters: Transmission level (-1dBm unit)| T.38 Parameters: Transmission level (-1dBm unit)]]
+<br>
+Fax/Modem Pass-through Parameters
+* [[Parameter: Fax Modem Pass-Through Parameters: Detection Type| Fax Modem Pass-Through Parameters: Detection Type]]
+* [[Parameter: Fax Modem Pass-Through Parameters: Codec| Fax Modem Pass-Through Parameters: Codec]]
+* [[Parameter: Fax Modem Pass-Through Parameters: Jitter Buffer Depth| Fax Modem Pass-Through Parameters: Jitter Buffer Depth]]
+* [[Parameter: Fax Modem Pass-Through Parameters: Use NSE| Fax Modem Pass-Through Parameters: Use NSE]]