Modify RTP and Audio profile A: Difference between revisions

Latest revision as of 11:57, 6 November 2014

Applies to versions: v2.6, v2.7

To configure RTP and Audio settings, do the following:

1- Click RTP and Audio in the Editing Profile window, to display the customizable options.

2- Modify settings as required.

Click Save

List of Parameters

Codec

G726 AAL2 format

Jitter Buffer

TDM Volume Control

Echo Cancellation

RTCP

Voice Activity Detection

Voice Activity Detection: Noise floor level

Packet Network

@@ Line 1: / Line 1: @@
-=== '''''Applies to version v2.6''''' ===
+=== '''''Applies to versions: v2.6, v2.7''''' ===
 {{DISPLAYTITLE:Modifying RTP and Audio Settings}}
@@ Line 19: / Line 19: @@
 * Click '''Save'''
+==List of Parameters==
+Codec
+* [[Parameter: G726 AAL2 format|G726 AAL2 format ]]
+Jitter Buffer
+* [[Parameter: Jitter Buffer: Initial Depth|Jitter Buffer: Initial Depth]]
+* [[Parameter: Jitter Buffer: Minimum Depth|Jitter Buffer: Minimum Depth]]
+* [[Parameter: Jitter Buffer: Maximum Depth|Jitter Buffer: Maximum Depth]]
+* [[Parameter: Jitter Buffer: Smooth deletion|Jitter Buffer: Smooth deletion]]
+TDM Volume Control
+* [[Parameter: TDM Volume Control: TX Gain Level|TX Gain Level]]
+* [[Parameter: TDM Volume Control: RX Gain Level|RX Gain Level]]
+Echo Cancellation
+* [[Parameter: Echo Cancellation: Enabled|Echo Cancellation: Enabled]]
+* [[Parameter: Echo Cancellation: Gain Power Level|Echo Cancellation: Gain Power Level]]
+RTCP
+* [[Parameter: RTCP: Enabled|RTCP: Enabled]]
+* [[Parameter: RTCP: Transmission Interval|RTCP: Transmission Interval ]]
+* [[Parameter: RTCP: Use XRTCP|RTCP: Use XRTCP ]]
+* [[Parameter: RTCP: SDES-CNAME|RTCP: SDES-CNAME]]
+Voice Activity Detection
+* [[Parameter: Voice Activity Detection: Noise floor level|Voice Activity Detection: Noise floor level]]
+Packet Network
+* [[Parameter: Packet Network: Type of Service|Packet Network: Type of Service ]]
+* [[Parameter: Packet Network: Packet Loss Concealment|Packet Network: Packet Loss Concealment]]