Toolpack v2.4:Create a NAP: Difference between revisions

Latest revision as of 08:23, 13 May 2011

A Network Access Point (NAP) represents the entry point to another network or destination peer.

To create a network access point (NAP):

1. Click "NAP" in the navigation panel:

2. Click "Create New NAP" in the NAP information panel:

3. Configure the new NAP:

Enter a name for the NAP
Select a user-created profile, if not, select "default"
Click "Create" to finalize the configuration

4. Verify that the "NAP was successfully created" message appears:

5. Associate an ISUP interface with the NAP:

Select an interface
Click the "<<" button to add the interface to the list

The following screen is displayed:

Select a value for Channel Usage, to avoid call collision
Click "Save" to finalize the configuration

Verify that the "NAP was successfully update" message appears:

@@ Line 1: / Line 1: @@
-==To create a network access point (NAP):==
+A Network Access Point (NAP) represents the entry point to another network or destination peer.
-'''1. Click "NAP" in the navigation panel:'''
+== To create a network access point (NAP): ==
-[[Image:Web_Portal_v2.4_Navigation_Panel_NAP.png]]
+'''1. Click "NAP" in the navigation panel:'''
-'''2. Click "Create New NAP" in the NAP information panel:'''
+[[Image:Web Portal v2.4 Navigation Panel NAP.png]]
-[[Image:Web_Portal_v2.4_Create_NAP.png|700px]]
+'''2. Click "Create New NAP" in the NAP information panel:'''
-'''3. Configure the new NAP:'''
+[[Image:Web Portal v2.4 Create NAP.png|700px]]
-*Enter a name for the NAP
-*Click "Create" to finalise the configuration
-[[Image:Web_Portal_v2.4_Creating_NAP.png|700px]]
+'''3. Configure the new NAP:'''
-'''4. Verify that the "NAP was successfully created" message appears:'''
+*Enter a name for the NAP
+*Select a user-created profile, if not, select "default"
+*Click "Create" to finalize the configuration
-[[Image:Web_Portal_v2.4_NAP_Created.png|700px]]
+[[Image:Web Portal v2.4 Creating NAP.png|700px]]
-'''5. Associate a SIP access point with the NAP:'''
+'''4. Verify that the "NAP was successfully created" message appears:'''
-*Select an access point
-*Click the "<<" button to add the access point to the list
-[[Image:Web_Portal_v2.4_NAP_SIP.png|700px]]
+[[Image:Web Portal v2.4 NAP Created.png|700px]]
-'''The following screen is displayed:'''
+<br>
-[[Image:Web_Portal_v2.4_NAP_SIP_Params.png]]
+'''5. Associate an ISUP interface with the NAP:'''
-*Enter a proxy address
-*Click "Save" to finalise the configuration
-'''Verify that the "NAP was successfully updated" message appears:'''
+*Select an interface
+*Click the "&lt;&lt;" button to add the interface to the list
-[[Image:Web_Portal_v2.4_NAP_SIP_Created.png|700px]]
+[[Image:Web Portal v2.4 NAP ISUP.png|700px]]
-'''6. Alternately, an ISDN stack can be associated with the NAP:'''
+<br> '''The following screen is displayed:'''
-*Select a stack
-*Click the "<<" button to add the stack to the list
-[[Image:Web_Portal_v2.4_NAP_ISDN.png|700px]]
+[[Image:Web Portal v2.4 NAP ISUP Params.png|700px]]
-'''The following screen is displayed:'''
+*Select a value for [[Parameter:_Channel_Usage|Channel Usage]], to avoid call collision
+*Click "Save" to finalize the configuration
-[[Image:Web_Portal_v2.4_NAP_ISDN_Params.png|700px]]
+<br> '''Verify that the "NAP was successfully update" message appears:'''
-*Click "Save" to finalise the configuration
+[[Image:Web Portal v2.4 NAP ISUP Created.png|700px]]
-'''Verify that the "NAP was successfully updated" message appears:'''
-[[Image:Web_Portal_v2.4_NAP_ISDN_Created.png|700px]]
-'''7. Associate an ISUP interface with the NAP:'''
-*Select an interface
-*Click the "<<" button to add the interface to the list
-'''The following screen is displayed:'''
-[[Image:Web_Portal_v2.4_NAP_ISUP_Params|700px]]
-*Click "Save" to finalise the configuration
-'''Verify that the "NAP was successfully update" message appears:'''
-[[Image:Web_Portal_v2.4_NAP_ISUP_Created|700px]]
-[[Image:Web_Portal_v2.4_NAP_ISUP.png|700px]]