Actions

Toolpack v2.5:Creating a New Gateway Configuration: Difference between revisions
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
Follow these steps, in order to configure a new Gateway configuration:
The Gateway Application is used to bridge 2 call legs, according to a set of routes. The Gateway Application receives incoming calls from [[Toolpack Application:toolpack engine|toolpack_engine]], tries to find a matching route, remaps call parameters if required, and then tells toolpack_engine to generate an outgoing call.
 
Follow these steps, in order to create a new Gateway configuration:
 


1. Select '''Configurations''' , under '''Gateway''' from the navigation panel:
1. Select '''Configurations''' , under '''Gateway''' from the navigation panel:
Line 11: Line 14:




3. Enter a '''name''' for the new configuration
3. Enter parameters for the configuration:
 
4. Enter a '''bin path''' for the new configuration
 
5. Enter a working '''path''' for the new configuration


6. Click '''Create''':
* Enter a '''name''' for the new configuration
* Enter a '''bin path''' for the new configuration
* Enter a working '''path''' for the new configuration
* Click '''Create'''


[[File:Toolpack_v2.5_Creating_Gateway_Configuration.png‎]]
[[File:Toolpack_v2.5_Creating_Gateway_Configuration.png‎]]




7. Verify that the "Gateway configuration was successfully created" message appears:
4. Verify that the '''Gateway configuration was successfully created''' message appears


[[File:Toolpack_v2.5_Gateway_Configuration_Created.png‎|700px]]
[[File:Toolpack_v2.5_Gateway_Configuration_Created.png‎|700px]]

Latest revision as of 14:34, 14 July 2010

The Gateway Application is used to bridge 2 call legs, according to a set of routes. The Gateway Application receives incoming calls from toolpack_engine, tries to find a matching route, remaps call parameters if required, and then tells toolpack_engine to generate an outgoing call.

Follow these steps, in order to create a new Gateway configuration:


1. Select Configurations , under Gateway from the navigation panel:


2. Click Create New Configuration:


3. Enter parameters for the configuration:

  • Enter a name for the new configuration
  • Enter a bin path for the new configuration
  • Enter a working path for the new configuration
  • Click Create


4. Verify that the Gateway configuration was successfully created message appears

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack_v2.5:Creating_a_New_Gateway_Configuration&oldid=7125"