Actions

Toolpack v2.4:Create an M3UA Route: Difference between revisions
(Split M3UA route configuration, this page is used for IPSP and ASP only)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
==To create an M3UA route:==
== To create an M3UA route: ==


'''1. Click "Create New M3ua Route" in the M3UA network configuration window:'''
'''1. Click "Create New M3ua Route" in the M3UA network configuration window:'''  


[[Image:Web_Portal_v2.4_Create_M3UA_Route.png|700px]]
[[Image:Web Portal v2.4 Create M3UA Route.png|700px]]  


'''2. Configure the new M3UA route:'''
'''2. Configure the new M3UA route:'''  
*Enter a name for the route
 
*Select a route type:
*Enter a name for the route  
**Local
*Select a route type:  
**Mtp3 (used with [[DPC]])
**Local (not used)
**Psrv (used with [[OPC]])
**Mtp3 (not used: Signalling gateway only)  
*Select an M3UA peer server (choose Local Server, if associated to an [[OPC]], select NONE, if using [[DPC]])
**Psrv  
*Select an M3UA user part (select NONE, if associated with a [[DPC]])
*Select an M3UA peer server (choose Local Peer server, if associated with an [[OPC]], select Remote Peer server, if using [[DPC]])  
*Select a point code
*Select an M3UA user part (select NONE, if associated with a [[DPC]])  
*Select a point code mask
*Select a point code  
*Select a sub-service field type:
*Select a point code mask (Recommanded value: Exact match)
**None
*Select a sub-service field type:  
**[[SCCP]]
**None  
**[[ISUP]]
**[[SCCP]]  
**[[ISUP]]  
*Click "Create" to finalize the configuration
*Click "Create" to finalize the configuration


[[Image:Web_Portal_v2.4_Creating_M3UA_Route.png|700px]]
[[Image:Web Portal v2.4 Creating M3UA Route.png|700px]]  


'''3. Verify that the "M3ua Route was successfully created" message appears:'''
'''3. Verify that the "M3ua Route was successfully created" message appears:'''  


[[Image:Web_Portal_v2.4_M3UA_Route_Created.png|700px]]
[[Image:Web Portal v2.4 M3UA Route Created.png|700px]]

Latest revision as of 17:56, 8 February 2010

To create an M3UA route:

1. Click "Create New M3ua Route" in the M3UA network configuration window:

2. Configure the new M3UA route:

  • Enter a name for the route
  • Select a route type:
    • Local (not used)
    • Mtp3 (not used: Signalling gateway only)
    • Psrv
  • Select an M3UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer server, if using DPC)
  • Select an M3UA user part (select NONE, if associated with a DPC)
  • Select a point code
  • Select a point code mask (Recommanded value: Exact match)
  • Select a sub-service field type:
  • Click "Create" to finalize the configuration

3. Verify that the "M3ua Route was successfully created" message appears:

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack_v2.4:Create_an_M3UA_Route&oldid=5512"