Toolpack v2.4:Create an M3UA Network: Difference between revisions

Latest revision as of 17:41, 8 February 2010

1. Click "Create New M3ua Network" in the M3UA information panel:

2. Configure the new M3UA network:

Enter a name for the network
Select a protocol type:
- ITU
- ANSI
- CHINA
- TTC
Select a sub-service field:
- International
- National
- National_Reserved
- International_Reserved
Select a DPC length:
- 14 bits
- 16 bits
- 24 bits
Select an SLS range:
- 4 bits
- 5 bits
- 8 bits
Click "Create" to finalize the configuration

3. Verify that the "M3ua Network was successfully created" message appears:

@@ Line 1: / Line 1: @@
-==To create an M3UA network:==
+== To create an M3UA network: ==
 '''1. Click "Create New M3ua Network" in the M3UA information panel:'''
-[[Image:Web_Portal_v2.4_Create_M3UA_Network.png|700px]]
+[[Image:Web Portal v2.4 Create M3UA Network.png|700px]]
 '''2. Configure the new M3UA network:'''
-*Enter a name for the network
-*Select a protocol type
-*Select a sub-service field
-*Select a DPC length
-*Select an SLS range
-*Click "Create" to finalise the configuration
-[[Image:Web_Portal_v2.4_Creating_M3UA_Network.png|700px]]
+*Enter a name for the network
+*Select a protocol type:
+**[[ITU]]
+**[[ANSI]]
+**CHINA
+**[[TTC]]
+*Select a sub-service field:
+**International
+**National
+**National_Reserved
+**International_Reserved
+*Select a [[DPC]] length:
+**14 bits
+**16 bits
+**24 bits
+*Select an [[SLS]] range:
+**4 bits
+**5 bits
+**8 bits
+*Click "Create" to finalize the configuration
-'''3. Verify that the "M3ua Network was successfully created" message appears:'''
+[[Image:Web Portal v2.4 Creating M3UA Network.png|700px]]
-[[Image:Web_Portal_v2.4_M3UA_Network_Created.png|700px]]
+'''3. Verify that the "M3ua Network was successfully created" message appears:'''
+[[Image:Web Portal v2.4 M3UA Network Created.png|700px]]