Toolpack v2.4:Create an MTP3 Route: Difference between revisions
m (STP definition) |
|||
| Line 1: | Line 1: | ||
[[MTP3]] routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes. | [[MTP3]] routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes. | ||
==To create an MTP3 route:== | == To create an MTP3 route: == | ||
'''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:''' | '''1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:''' | ||
[[Image: | [[Image:Web Portal v2.4 Create MTP3 Route.png|700px]] | ||
'''2. Configure the new MTP3 route:''' | '''2. Configure the new MTP3 route:''' | ||
*Enter a name for the route | |||
*Select a point code for the route | *Enter a name for the route | ||
*Select a restart procedure: | *Select a point code for the route | ||
**None | *Select a restart procedure: | ||
**ITU88 | **None | ||
**ITU92 | **ITU88 | ||
**[[ANSI]] | **ITU92 | ||
*Select a point type: | **[[ANSI]] | ||
**SP (Signalling Point) | *Select a point type: | ||
**STP ( ) | **SP (Signalling Point) | ||
*Check Route to Adjacent, if this route is to the adjacent network | **STP (Signal Transfer Point) | ||
*Check Route to Adjacent, if this route is to the adjacent network | |||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
[[Image: | [[Image:Web Portal v2.4 Creating MTP3 Route.png|700px]] | ||
'''3. Verify that the "Mtp3Route was successfully created" message appears:''' | |||
[[Image:Web Portal v2.4 MTP3 Route Created.png|700px]] | |||
'''4. Associate the newly created route with a linkset:''' | |||
*Select a linkset from the list provided at the bottom of the route configuration window | |||
*Select a linkset from the list provided at the bottom of the route configuration window | *Click the "<<" button to associate the linkset with the newly created route | ||
*Click the " | |||
[[Image: | [[Image:Web Portal v2.4 MTP3 Route Linkset.png|700px]] | ||
Latest revision as of 16:09, 8 February 2010
MTP3 routes are built to route traffic from previously created point codes using linksets. One route is created per prevously defined point codes.
To create an MTP3 route:
1. Click "Create New Mtp3 Route" in the MTP3 network configuration window:
2. Configure the new MTP3 route:
- Enter a name for the route
- Select a point code for the route
- Select a restart procedure:
- None
- ITU88
- ITU92
- ANSI
- Select a point type:
- SP (Signalling Point)
- STP (Signal Transfer Point)
- Check Route to Adjacent, if this route is to the adjacent network
- Click "Create" to finalize the configuration
3. Verify that the "Mtp3Route was successfully created" message appears:
4. Associate the newly created route with a linkset:
- Select a linkset from the list provided at the bottom of the route configuration window
- Click the "<<" button to associate the linkset with the newly created route
