Toolpack v2.4:Create MTP3 Links (M2PA): Difference between revisions
| (2 intermediate revisions by the same user not shown) | |||
| Line 10: | Line 10: | ||
*Enter a name for the link | *Enter a name for the link | ||
*Under "Type of link to bind", select '''M2PA'''. | *Under "Type of link to bind", select '''M2PA'''. | ||
*Select an | *Select an MTP2 link | ||
*Select a priority level | *Select a priority level (from 0 to 3) | ||
*Select a Messages priority | *Select a Messages priority (from "none" to 3) | ||
* | *Set the C Link value | ||
* | *Enter a Link Test Slc (this value is unique in the link list) | ||
*Enter Link Test Characters | |||
*Click "Create" to finalize the configuration | *Click "Create" to finalize the configuration | ||
Latest revision as of 10:45, 16 January 2010
A linkset is used to logically combine multiple MTP3 links going to the same DPC into a single entity. One linkset could be the links between a point code identifying the Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.
To create an MTP3 link:
1. Click "Create New Mtp3 Link" in the MTP3 linkset configuration window:
2. Configure the new MTP3 link:
- Enter a name for the link
- Under "Type of link to bind", select M2PA.
- Select an MTP2 link
- Select a priority level (from 0 to 3)
- Select a Messages priority (from "none" to 3)
- Set the C Link value
- Enter a Link Test Slc (this value is unique in the link list)
- Enter Link Test Characters
- Click "Create" to finalize the configuration
3. Verify that the "Mtp3Link was successfully created" message appears:
