Toolpack:Creating MTP2 Links A: Difference between revisions

Latest revision as of 11:32, 4 August 2016

Applies to version(s): v2.5, v2.6., v2.7

Now that you have created an MTP2 configuration, you must create the necessary MTP2 links. An MTP2 link is used to connect the MTP2 physical layer to a line service carrying SS7 signaling.

To create an MTP2 link:

1- Click Create New Mtp2 Link in the MTP2 configuration window

2- Configure the new MTP2 link:

Enter a name for the new link
Select a connection mode
Select a line service
Assign timeslots to the link
Select a protocol type
Select a DPC length
Select a timeslot rate
Click Create

3- Verify that the "MTP2 link was successfully created" message appears

@@ Line 1: / Line 1: @@
-The MTP2 link is used to connect the MTP2 physical layer to a line service carrying SS7 signaling.
+=== '''''Applies to version(s): v2.5, v2.6., v2.7''''' ===
+{{DISPLAYTITLE:Creating MTP2 Links}}
+Now that you have created an MTP2 configuration, you must create the necessary MTP2 links.
+An MTP2 link is used to connect the MTP2 physical layer to a line service carrying SS7 signaling.
 To create an MTP2 link:
 - Click '''Create New Mtp2 Link''' in the MTP2 configuration window
@@ Line 18: / Line 22: @@
 * Click '''Create'''
-[[Image:Toolpack_v2.5_Creating_MTP2_Link.png]]
+[[Image:Create_MTP2_Link_2.7.jpg]]
-- Verify that the '''MTP2 link was successfully created''' message appears
+- Verify that the '''"MTP2 link was successfully created"''' message appears
 [[Image:Toolpack_v2.5_MTP2_Link_Created.png]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: Connection Mode|Connection Mode]]
+* [[Parameter: Line Service|Line Service]]
+* [[Parameter: Timeslots|Timeslots]]
+* [[Parameter: Protocol Type|Protocol Type]]
+* [[Parameter: DPC Length|DPC Length]]
+* [[Parameter: Timeslot Rate|Timeslot Rate]]