Actions

Toolpack:Configuring DNS Parameters B: Difference between revisions

 
(4 intermediate revisions by the same user not shown)
Line 15: Line 15:




3- Click '''Advanced'''
3- Click '''DNS Parameters''' in the SIP configuration window.
* Set the '''Advanced Transport Servers configuration''' checkbox.
* Click '''Save'''
 
[[Image:ConfigureDnsParams_2.png]]
 
 
3- Create a new dedicated transport server (not part of any SAP).
* Click '''Create New Transport Server'''
 
[[Image:ConfigureDnsParams_3.png]]
 
 
4-Select from which interface and port the DNS request will be sent
* Click '''Create'''
 
[[Image:ConfigureDnsParams_3.png]]
 
 
5- Click '''DNS Params''' in the SIP configuration window.
*Enable the DNS, cache and ENUM support (if required)
*Enable the DNS, cache and ENUM support (if required)
*Enter the IP address of the DNS server
*Enter the IP address of the DNS server
*Click '''Save'''
*Click '''Save'''


[[Image:ConfigureDnsParams_4.png]]
[[Image:ConfigureDnsParams_5.png]]
 


4- Verify that the 'SIP transport server was successfully updated' message is displayed.


6- Verify that the 'SipCfg was successfully updated' message is displayed.
[[Image:ConfigureDnsParams_6.png]]


[[Image:ConfigureDnsParams_5.png]]
==List of Parameters==
 
* [[Parameter: Dns Enabled|Enabled]]
* [[Parameter: Use Cache|Use Cache]]
* [[Parameter: Use Enum|Use Enum]]
* [[Parameter: Cache Expire Time|Cache Expire Time]]
* [[Parameter: Query Timer|Query Timer]]
* [[Parameter: Query Retry Count|Query Retry Count]]
* [[Parameter: Server Address|Server Address]]
* [[Parameter: Server DNS Port|Server DNS Port]]
* [[Parameter: Local Port Type|Local Port Type]]
* [[Parameter: Local DNS Port|Local DNS Port]]
* [[Parameter: Local IP Interface|Local IP Interface]]

Latest revision as of 12:05, 27 August 2015

Applies to version(s): v2.8

To configure the DNS parameters

1- Enable Advanced Transport Server Configuration in the SIP configuration window.

  • Click SIP in the navigation panel.


2- Select a SIP configuration.


3- Click DNS Parameters in the SIP configuration window.

  • Enable the DNS, cache and ENUM support (if required)
  • Enter the IP address of the DNS server
  • Click Save


4- Verify that the 'SIP transport server was successfully updated' message is displayed.

List of Parameters