Actions

Toolpack:Creating an M3UA Route (SGP) A: Difference between revisions

No edit summary
No edit summary
 
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Now that you have configured M3UA user parts, PSPs, and peer servers, you must create an M3UA route for your system.
=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
{{DISPLAYTITLE:Creating an M3UA Route (SGP)}}
Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.
 
You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).
 


To create an M3UA route on an SGP:
To create an M3UA route on an SGP:
Line 9: Line 14:


2- Configure the new M3UA route:  
2- Configure the new M3UA route:  
 
'''For OPC: This route is used for local point code and to reach the ASP.'''
* Enter a '''name''' for the route
* Select a '''route type''':Psrv
* Select an '''M3UA peer server''': Select the previously configured M3US Peer Server with the right RC
* Select an '''M3UA user part''':NONE
* Select a '''point code''': Select the OPC from the MTP3 linkset
* Select a '''point code mask''' (Recommended value: Exact match)
* Select a '''sub-service field type''':ISUP or SCCP
* Click '''Create'''
 
[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_OPC.png]]
 
 
'''For DPC: This route is used to reach the DPC used in MTP3 configuration.'''
* Enter a '''name''' for the route  
* Enter a '''name''' for the route  
* Select a '''route type'''  
* Select a '''route type''':Mtp3
* Select an '''M3UA peer server''' (choose Remote Peer server, if associated with an [[OPC]], select NONE, if using [[DPC]])
* Select an '''M3UA user part''': Select the previously configured M3UA User Part
* Select an '''M3UA user part''' (if associated with a [[DPC]], select NONE for [[OPC]])
* Select a '''point code''': Select the DPC from the MTP3 linkset
* Select a '''point code'''  
* Select a '''point code mask''' (Recommended value: Exact match)  
* Select a '''point code mask''' (Recommended value: Exact match)  
* Select a '''sub-service field type'''
* Select a '''sub-service field type''':ISUP or SCCP
* Click '''Create'''
* Click '''Create'''


[[Image:Toolpack_v2.5_Creating_M3UA_Route.png]]  
[[Image:Toolpack_v2.5_Creating_M3UA_Route(SGP)_DPC.png]]  


3- Verify that the '''"M3ua Route was successfully created"''' message appears  
3- Verify that the '''"M3ua Route was successfully created"''' message appears  


[[Image:Toolpack_v2.5_M3UA_Route_Created.png]]
[[Image:Toolpack_v2.5_M3UA_Route_Created.png]]
==List of Parameters==
* [[Parameter: Name|Name]]
* [[Parameter: Route Type|Route Type]]
* [[Parameter: M3UA Peer Server|M3UA Peer Server]] (only if Psrv was chosen as the route type)
* [[Parameter: M3UA Userpart|M3UA Userpart]]
* [[Parameter: Point Code|Point Code]]
* [[Parameter: Point Code Mask|Point Code Mask]]
* [[Parameter: Sub-Service Field Type|Sub-Service Field Type]]

Latest revision as of 15:19, 2 July 2014

Applies to version(s): v2.5, v2.6, v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).


To create an M3UA route on an SGP:


1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

  • Enter a name for the route
  • Select a route type:Psrv
  • Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
  • Select an M3UA user part:NONE
  • Select a point code: Select the OPC from the MTP3 linkset
  • Select a point code mask (Recommended value: Exact match)
  • Select a sub-service field type:ISUP or SCCP
  • Click Create


For DPC: This route is used to reach the DPC used in MTP3 configuration.

  • Enter a name for the route
  • Select a route type:Mtp3
  • Select an M3UA user part: Select the previously configured M3UA User Part
  • Select a point code: Select the DPC from the MTP3 linkset
  • Select a point code mask (Recommended value: Exact match)
  • Select a sub-service field type:ISUP or SCCP
  • Click Create

3- Verify that the "M3ua Route was successfully created" message appears


List of Parameters

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_an_M3UA_Route_(SGP)_A&oldid=15533"