Toolpack:Creating an M3UA Route A: Difference between revisions

Latest revision as of 14:48, 12 February 2014

Applies to version(s): v2.5, v2.6., v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC). To create an M3UA route:

1- Click Create New M3ua Route in the M3UA network configuration window

2- Configure the new M3UA route:

Enter a name for the route
Select a route type
Select an M3UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer server, if using DPC)
Select an M3UA user part (select NONE, if associated with a DPC)
Select a point code
Select a point code mask (Recommended value: Exact-match)
Select a sub-service field type
Click Create

3- Verify that the "M3ua Route was successfully created" message appears

List of Parameters

Name
Route Type
M3UA Peer Server (only if Psrv was chosen as the route type)
M3UA Userpart
Point Code
Point Code Mask
Sub-Service Field Type

@@ Line 1: / Line 1: @@
-Now that you have configured M3UA user parts, PSPs, and peer servers, you must create an M3UA route for your system.
+=== '''''Applies to version(s): v2.5, v2.6., v2.7''''' ===
+{{DISPLAYTITLE:Creating an M3UA Route}}
+Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.
+You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).
 To create an M3UA route: