Toolpack:Creating IUA Links A: Difference between revisions

Latest revision as of 12:09, 15 July 2013

Now that you have created an IUA cluster, you must create IUA links for your system.

To create an IUA link:

1- Click Create New Iua Link in the IUA cluster configuration window:

2- Configure the new IUA link:

3- Verify that the "Iua Link was successfully created" message appears

@@ Line 1: / Line 1: @@
+=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
+{{DISPLAYTITLE:Creating IUA Links}}
 Now that you have created an [[IUA]] cluster, you must create IUA links for your system.
@@ Line 6: / Line 8: @@
 - Click '''Create New Iua Link''' in the IUA cluster configuration window:
-[[Image:Toolpack_v2.5_Create_M2UA_Link.png]]
+[[Image:Create_new_Iua_link.jpg]]
 - Configure the new IUA link:
 * Enter a '''name''' for the link
-* '''IMPORTANT!'''
-** '''For a system on a signaling gateway''': Select an '''MTP2 link'''
-** '''For a system on a media gateway controller''': Select '''NONE'''
-* Select a '''protocol type''' (same as MTP2)
-* Select an '''interface ID type'''
 * Enter an appropriate '''interface ID''' (must be unique to each link)
+* Select a '''line service'''
+* Select a '''variant'''
+* Select a '''side'''
 * Click '''Create'''
-[[Image:Toolpack_v2.5_Creating_M2UA_Link.png]]
+[[Image:Config_new_Iua_link.jpg]]
 - Verify that the '''"Iua Link was successfully created"''' message appears
-[[Image:Toolpack_v2.5_M2UA_Link_Created.png]]
+[[Image:Iua_link_success.jpg]]
@@ Line 29: / Line 29: @@
 * [[Parameter: Name|Name]]
-* [[Parameter: MTP2 Link|MTP2 Link]]
-* [[Parameter: Protocol Type|Protocol Type]]
-* [[Parameter: Interface ID Type|Interface ID Type]]
 * [[Parameter: Interface ID|Interface ID]]
+* [[Parameter: Variant|Variant]]
+* [[Parameter: Side|Side]]