Actions

Toolpack:Creating a SIP Transport Server B: Difference between revisions

(Created page with "=== '''''Applies to version(s): v2.7.''''' === {{DISPLAYTITLE:Creating a SIP Stack}} Session Initiation Protocol, more commonly known as SIP, is a signaling protocol for p...")
 
No edit summary
 
Line 1: Line 1:
=== '''''Applies to version(s): v2.7.''''' ===
=== '''''Applies to version(s): v2.7.''''' ===
{{DISPLAYTITLE:Creating a SIP Stack}}
{{DISPLAYTITLE:Creating a SIP Transport Server}}
Session Initiation Protocol, more commonly known as [[SIP]], is a signaling protocol for packet-based networks and is commonly used, along with H.323 to provide signaling for voice over IP (VoIP) communications.
Now that you have created a SIP stack, you must must create a new SIP transport server for your configuration.
You must now configure SIP signaling for your system. The first step in doing so is to create a SIP stack.
 
'''Note:''' In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.
 
To do so:
To do so:


Line 11: Line 13:




2- Click '''Create New Sip'''
2- Click '''Edit''' next to the SIP stack for which you wish to create a transport server
 
[[Image:Toolpack_v2.5_Edit_SIP.png]]


[[Image:Sip_A_1.png]]


3- Click '''Create New Transport Server''' under the '''Transport Servers''' list


3- Create the new SIP stack:
[[Image:Toolpack_v2.5_Create_SIP_Server.png]]


* Verify that the box labeled '''Enabled''' is checked
 
* Enter a '''name''' for the stack
4- Create the new SIP transport server:
* Select a '''virtual adapter'''
 
* Enter a '''name''' for the server
* Select an appropriate '''port type'''
* Select an appropriate '''IP interface'''
* Click '''Create'''
* Click '''Create'''


[[Image:Toolpack_v2.5_Creating_SIP.png]]
[[Image:Toolpack v2.6 Creating SIP Server.png]]
 
 


5- Verify that the '''"SIP transport server was successfully created"''' message appears, and that the new server is listed in the '''Transport Servers''' list


4- Verify that the '''"SipCfg was successfully created"''' message appears
[[Image:Toolpack_v2.5_SIP_Server_Created.png|left|frame|Confirmation message.]]


[[Image:Toolpack_v2.5_SIP_Created.png]]
[[Image:Toolpack_v2.6_SIP_Server_Created.png|left|frame|Server appears in list.]]
<br><br><br><br><br><br><br><br><br><br><br><br><br>




==List of Parameters==
==List of Parameters==


* [[Parameter: Enabled|Enabled]]
* [[Parameter: Name|Name]]
* [[Parameter: Name|Name]]
* [[Parameter: Adapter|Virtual Adapter]]
* [[Parameter: Port Type|Port Type]]
* [[Parameter: IP Interface|IP Interface]]

Latest revision as of 14:29, 12 July 2013

Applies to version(s): v2.7.

Now that you have created a SIP stack, you must must create a new SIP transport server for your configuration.

Note: In order to employ SIP transport servers, the protocol that they will use to transport the SIP signaling traffic must be defined.

To do so:


1- Click SIP in the navigation panel


2- Click Edit next to the SIP stack for which you wish to create a transport server


3- Click Create New Transport Server under the Transport Servers list


4- Create the new SIP transport server:

  • Enter a name for the server
  • Select an appropriate port type
  • Select an appropriate IP interface
  • Click Create


5- Verify that the "SIP transport server was successfully created" message appears, and that the new server is listed in the Transport Servers list

Confirmation message.
Server appears in list.















List of Parameters

Retrieved from "https://docs.telcobridges.com/w/index.php?title=Toolpack:Creating_a_SIP_Transport_Server_B&oldid=14130"