Toolpack:Creating MTP3 Links (M2UA) A: Difference between revisions

Latest revision as of 14:47, 9 July 2012

Applies to version(s): v2.5, v2.6.

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with a M2UA link; they are connected in a one-to-one fashion.

To create an MTP3 link on your M2UA system:

1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

2- Configure the new MTP3 link:

Enter a name for the link
Under Type of link to bind, select M2UA
Select an M2UA link
Click Create

3- Verify that the "Mtp3Link was successfully created" message appears

@@ Line 1: / Line 1: @@
+=== '''''Applies to version(s): v2.5, v2.6.''''' ===
+{{DISPLAYTITLE:Creating MTP3 Links (M2UA)}}
+Now that you have created an MTP3 linkset, you must create MTP3 links for your system.
+An MTP3 link is used to connect with a M2UA link; they are connected in a one-to-one fashion.
 To create an MTP3 link on your M2UA system:
 - Click '''Create New Mtp3 Link''' in the MTP3 linkset configuration window
@@ Line 14: / Line 20: @@
 [[Image:Toolpack_v2.5_Creating_MTP3_Link_M2UA.png]]
-- Verify that the '''Mtp3Link was successfully created''' message appears
+- Verify that the '''"Mtp3Link was successfully created"''' message appears
 [[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: Type of Link to Bind|Type of Link to Bind]]
+* [[Parameter: M2UA Link|M2UA Link]]