Toolpack:Status Menus:Applications A: Difference between revisions

Latest revision as of 14:10, 9 July 2012

Applies to version(s): v2.5, v2.6.

General and detailed status information about the applications that are run by one or more host machine(s) is accessible from the Applications tab of the Global-->Status menu.

General view

The general view, shown below, lists the applications, and their current general status (ready, fault, not running. This window also provides a count of all applications with ready or fault status.

Detailed view

A more detailed description of each application can be viewed by following the appropriate link in the general window (shown above).

The detailed status screen, shown below, lists the states of the application, its name, the host machine and the location of the application on the host.

From this detailed view, the Oam target state may be changed. To modify the Oam target state of an application:

Select a state from the Oam target state combo box.

Click Apply States to change the states.

@@ Line 1: / Line 1: @@
+=== '''''Applies to version(s): v2.5, v2.6.''''' ===
+{{DISPLAYTITLE:Status Menus:Applications}}
 General and detailed status information about the applications that are run by one or more host
 machine(s) is accessible from the '''Applications''' tab of the Global-->Status menu.
-'''NOTE TO SELF:THIS MUST BE CHANGED'''
+[[Image:Toolpack_v2.5_Navigation_Panel_Status.png]]
-=General view=
+==General view==
-The general view, shown below, lists the applications, their host machines and their current and targeted states as follows:
+The general view, shown below, lists the applications, and their current general status (ready, fault, not running.
-*'''Oam current state''': The current operating state of the application.
+This window also provides a count of all applications with ready or fault status.
-*'''Oam target state''': The desired state of the application. Activated from the detailed status view.
-*'''Oam ha current state''': If redundant applications exist, then this indicates its current high availability (HA) state. This is usually active if there is only one.
-*'''Oam ha target state''': If redundant applications exist, the state of primary or secondary is assigned.
+[[Image:Toolpack_v2.5_Status_Applications.png|700px]]
-[[Image:Toolpack_v2.5_Status_Aplications.png]]
+==Detailed view ==
+A more detailed description of each application can be viewed by following the appropriate link in the general window (shown above).
-=Detailed view =
 The detailed status screen, shown below, lists the states of the application, its name, the host machine and the location of the application on the host.
-From this detailed view, the 'Oam'target state may be changed.
-'''To modify the Oam target state of an application'''
+From this detailed view, '''the Oam target state may be changed'''.
+To modify the Oam target state of an application:
-. Select a state from the '''Oam target state''' combo box.
+* Select a state from the '''Oam target state''' combo box.
-. Click 'Apply States' to change the states.
+* Click '''Apply States''' to change the states.
-[[Image:Toolpack_v2.5_?.png]]
+[[Image:Toolpack_v2.5_Status_Individual.png|700px]]