View source for Toolpack v2.2:Adding a TMP6400

When you receive a new system, at least one [[TMP6400]] configuration will have been set in the [[Toolpack]] application server, by default. To add other TMP6400 devices, you must use the Tmedia [[Web Portal]].

[[Image:Schematic-pair-of-tmp6400s.jpg|thumb|250px|Schematic showing 2 TMP6400 devices with an external server and a second machine with a web browser]]

To add one or more additional TMP6400 devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server.


== To add a TMP6400 ==

'''1. Select Hardware from the navigation panel.'''


[[Image:Menu-hardware.jpg|150px]]


'''2. Click Create New Hardware from the information panel, to add a new TMP6400.'''


[[Image:Menu-create-new-hardware.jpg|600px]]


The Create New Hardware window is displayed.


'''3. Enter the serial number of the TMP6400. Typing in the Serial Number field will cause auto-completion of the field to occur.'''


[[Image:Screenshot-create-new-hardware.jpg|600px]]


'''4. Enter a name for the hardware device.'''

*Select TBGateway from the Adapter Type field.
*Select Enabled from the Target State field.
*Click Create to store your settings.


[[Image:Screenshot-create-new-hardware-create.jpg|600px]]


The List Hardware window is displayed.


'''5. Verify that the newly added TMP6400 device appears in the List Hardware window.'''


[[Image:Screenshot-create-new-hardware-success.jpg|600px]]


Should you omit necessary information, the Web Portal will display an error message as shown in the figure below.


[[Image:Screenshot-create-new-hardware-error.jpg|600px]]