View source for Toolpack:M3UA Use Case A:Creating MTP3 Links A

=== '''''Applies to version(s): v3.0''''' ===
{{DISPLAYTITLE:Creating MTP3 Links}}
After you create an MTP3 linkset, you associate it with MTP3 links. This is done because the MTP3 links are used to bind with either an MTP2, M2PA, or M2Ua link. They are connected in a one-to-one fashion. 

To create an MTP3 link:

1- Click '''MTP3''' in the navigation panel.

[[Image:Mtp3_0_A.png]]


2- Select an MTP3 network.

[[Image:Create_MTP3_Linkset_0.png]]


3- Select an MTP3 linkset

[[Image:Create_MTP3_Link_0.png]]


4- Click '''Create New Mtp3 Link''' in the MTP3 linkset configuration window

[[Image:Create_MTP3_Link_1.png]]


5- Configure the new MTP3 link:

* Enter a '''name''' for the link
* Under '''Type of link to bind''', select '''MTP2'''
* Select an '''MTP2 link'''
* Click '''Create'''

[[Image:Create_MTP3_Link_2.png]]


6- Verify that the '''"Mtp3 link was successfully created"''' message appears and that the link appears in the Mtp3 Link list.

[[Image:Create_MTP3_Link_3_1.png]]

==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Type of Link to Bind|Type of Link to Bind]]

* '''Depending on the type chosen:'''
** [[Parameter: MTP2 Link|MTP2 Link]]
** [[Parameter: M2PA Link|M2PA Link]]
** [[Parameter: M2UA Link|M2UA Link]]
* [[Parameter: Link Test Slc|Link Test Slc]]
* [[Parameter: Link Test Characters|Libk Test Characters]]


<div class="mw-collapsible mw-collapsed" data-collapsetext="Advanced Parameters" data-expandtext="Advanced Parameters" style="width: 400px;">
{| class="wikitable"
|-
* [[Parameter: Priority|Priority]]
* [[Parameter: Messages Priority|Messages Priority]]
* [[Parameter:MTP3_C Link|C Link]]
* [[Parameter: Discard Priority|Discard Priority]]
* [[Parameter: Flush Continue Flags|Flush Continue Flags]]
* [[Parameter: Msg Q Len Prio0|Msg Q Len Prio0]]
* [[Parameter: Msg Q Len Prio1|Msg Q Len Prio1]]
* [[Parameter: Msg Q Len Prio2|Msg Q Len Prio2]]
* [[Parameter: Msg Q Len Prio3|Msg Q Len Prio3]]
* [[Parameter: Max Frame Length|Max Frame Length]]
|}
</div>


<div class="mw-collapsible mw-collapsed" data-collapsetext="Timers" data-expandtext="Timers" style="width: 400px;">
{| class="wikitable"
|-
* [[Parameter: SLTM Maximum Retry|SLTM Maximum Retry]]
* [[Parameter: MTP3_T1 Timer|T1 Timer]]
* [[Parameter: MTP3_T2 Timer|T2 Timer]]
* [[Parameter: MTP3_T3 Timer|T3 Timer]]
* [[Parameter: MTP3_T4 Timer|T4 Timer]]
* [[Parameter: MTP3_T5 Timer|T5 Timer]]
* [[Parameter: MTP3_T7 Timer|T7 Timer]]
* [[Parameter: MTP3_T12 Timer|T12 Timer]]
* [[Parameter: MTP3_T13 Timer|T13 Timer]]
* [[Parameter: MTP3_T14 Timer|T14 Timer]]
* [[Parameter: MTP3_T17 Timer|T17 Timer]]
* [[Parameter: MTP3_T22 Timer|T22 Timer]]
* [[Parameter: MTP3_T23 Timer|T23 Timer]]
* [[Parameter: BSN Request Timer|BSN Request Timer]]
* [[Parameter: Periodic SLTM timer|Periodic SLTM timer]]
* [[Parameter: MTP3_SLTA Timer|SLTA Timer]]
* [[Parameter: Layer 2 Connect Timer|Layer 2 Connect Timer]]
* [[Parameter: False Congestion Detect Timer|False Congestion Detect Timer]]
* [[Parameter: Probation Link Oscillation Timer|Probation Link Oscillation Timer]]
* [[Parameter: Suspension Link Oscillation Timer|Suspension Link Oscillation Timer]]
* [[Parameter: Link Referral Craft Timer|Link Referral Craft Timer]]
* [[Parameter: Flow Control Request Timer|Flow Control Request Timer]]
* [[Parameter: Bind Confirmation Timer|Bind Confirmation Timer]]
|}
</div>