View source for FreeSBC:FreePBX Trunk Configuration:FreePBX Trunk Configuration

{{DISPLAYTITLE:Adding ProSBC as a SIP Trunk in the FreePBX Server}}
 
=Introduction=
This document provides instructions on how to configure FreePBX Server with the ProSBC a s SIP trunk. 
Please visit the following link for more details about [https://wiki.freepbx.org/display/F2/Trunk+Sample+Configurations  Configuring SIP Trunks in FreePBX Server]

=FreePBX SIP Trunk Configuration=

1. After logging in as an Admin to your FreePBX GUI, navigate to “Connectivity” → “Trunks” and press the “Add Trunk” button. Select the option “Add SIP (chan_pjsip) Trunk”<br>
[[Image:FreePBX_Trunk_1.png]]

2. Once done, this will bring up the Trunk Creation Screen. Under the General tab, enter a name for the trunk. For ease of management, It is recommended that this match the name of the SIP Endpoint you created in the ProSBC WebGUI for FreePBX NAP. <br>
[[Image:FreePBX_Trunk_2.png]]

3. Once done, navigate to the “pjsip Settings" → "General” tab. Here you will need to enter your endpoint information. If you're using an IP endpoint,
*Select None for Authentication
*SIP Server: Enter the Domain of your SIP Trunk (ProSBC FQDN or IP address)
*SIP Server Port: Set this to 5060 <br>
[[Image:FreePBX_Trunk_3.png]]

4. Once done, select the “PJSIP Settings” → “Codecs” Tab. Ensure correct codec are selected.<br>
[[Image:FreePBX_Trunk_4.png]]

=FreePBX Route Configuration=

1. To create an inbound route, navigate to “Connectivity” → “Inbound Routes” and click on "Add Inbound Route" <br>
[[Image:FreePBX_In_Route_1.png]]

2. Then set your options:
*Description: add a description of the route.  
*DID Number:  fill in the DID number that you will have from your ITSP
*Set Destination: choose Extensions from the first drop down and then select the extension you created from the second drop down
[[Image:FreePBX_In_Route_2.png]]

Once done, “Submit” the configuration.

3. To create an outbound route, navigate to “Connectivity” → “Outbound Routes” and click on "Add Outbound Route" <br>
[[Image:FreePBX_Out_Route_1.png]]

4. Under the “Route Settings” tab, leave everything as the default except the following:
*Route Name: Add a friendly name for the route you are creating.
*Trunk Sequence for Matched Routes: Use the drop down button to select the SIP Trunk you just created.
[[Image:FreePBX_Out_Route_2.png]]

5. Once done, select the “Dial Patterns” tab. You can manually define the dial patterns or use Dial Pattern wizard.<br>
[[Image:FreePBX_Out_Route_3.png]]

6. Once done, “Submit” the configuration and press the “Apply Config” button. The route is ready to be used and your FreePBX is now configured to with ProSBC.