View source for Toolpack:Creating an M3UA Peer Signalling Process (ASP) A

=== '''''Applies to version(s): v2.5, v2.6.''''' ===
{{DISPLAYTITLE:Creating an M3UA Peer Signalling Process (ASP)}}
Now that you have created an M3UA user part, you must create a new M3UA peer signaling process (PSP). 
A PSP is used to describe a remote SGP that is accessible through the M3UA system.

To create an M3UA Peer Signaling Process (PSP) on an ASP system:


1- Click '''Create New M3ua Peer Signaling Process''' in the M3UA network configuration window:

[[Image:Toolpack_v2.5_Create_M3UA_PSP.png]]

2- Configure the new M3UA PSP:

* Enter a '''name''' for the PSP
* Select '''Signaling Gateway Process (SGP)''' as the PSP type
* Enter a '''destination port'''
* Click '''Create'''

[[Image:Toolpack_v2.5_Creating_M3UA_PSP_ASP.png]]

3- Verify that the '''"M3ua PSP was successfully created"''' message appears

[[Image:Toolpack_v2.5_M3UA_PSP_Created.png]]

4- Associate a SAP with the new PSP:

* Select a '''SAP''' from the list of available SAPs
* Click the '''"<<"''' button to associate it with the PSP

[[Image:Toolpack_v2.5_M3UA_PSP_SAP.png]]

5- Enter a destination address for the PSP:

* Enter a '''destination address'''
* Click the '''"<<"''' button to add the destination address to the PSP
* Verify that the '''"<i>(your address)</i> was successfully added"''' message appears

[[Image:Toolpack_v2.5_M3UA_PSP_Address.png]]


==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: PSP Type|PSP Type]]
* [[Parameter: Destination Port|Destination Port]]