VoIP Ethernet Capture TSBC-HW - Revision history

Luc Morissette: Deleted page content

2021-01-27T22:19:05Z

Deleted page content

← Older revision		Revision as of 18:19, 27 January 2021
Line 1:		Line 1:
	~~__NOTOC__~~		{{DISPLAYTITLE:Page Has been removed}}
	~~=== '''''Applies to version(s): v3.0''''' ===~~
	{{DISPLAYTITLE:~~VoIP Ethernet Capture TSBC-HW~~}}

	~~== Capturing using the internal host of the TSBC-HW ==~~
	~~The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.~~

	~~=== Start Capture ===~~
	~~You need '''two''' SSH sessions to capture the traffic: <br />~~

	~~'''Step 1'''~~
	*Access the TSBC-HW management interface using SSH. Then, access the telecom baseboard using telnet:
	~~telnet [eth0 IP address of the telecom unit]~~

	~~For example~~

	~~telnet 172.16.123.45~~

	~~Prompt is now:~~
	~~0/tbgw>~~
	*Do command "mv88eMonitor" to get the PortMask and PortNumber:
	~~mv88eMonitor~~

	~~The output should be like this:~~
	~~Port Mapping:~~
	~~PortDesc : voip0 voip1 sw6352 fpga mgmt0 mgmt1 eth0 eth1 host sw6321 cpu~~
	~~PortNumber : 0 1 2 3 4 5 6 7 8 9 10 11 12 13~~
	~~PortMask : 0x1 0x2 0x4 0x8 0x10 0x20 0x40 0x80 0x100 0x200 0x400 0x800 0x1000 0x2000~~

	*Use this command to capture VoIP0 traffic (for 600 seconds or 10 minutes):
	~~mv88eMonitor 0x8 0x8 11 600~~
	*Use this command to capture VoIP1 traffic:
	~~mv88eMonitor 0x10 0x10 11 600~~

	~~In the example, the duration is 600 seconds. This will capture traffic for 10 minutes.~~

	~~Note: We do not recommend to keep capturing for a long time. This is only used for debugging purpose.~~
	~~<br />~~
	~~<br />~~

	~~'''Step 2'''~~

	*Access the TSBC-HW management interface using SSH<br />
	~~start tbx_cli_tools_remote~~
	~~[root@TB016635 ~]# tbx_cli_tools_remote~~

	*Connect to tbrouter
	~~(The following is displayed:)~~
	~~Available remote hosts to control (TBX_GW_PORT=12358, local IPs 172.16.0.1 / 172.18.0.1). Press corresponding letter to~~
	~~control:~~
	~~a : TB016634.tbrouter~~
	~~b : TB016635.gateway~~
	~~c : TB016635.logtrace~~
	~~d : TB016635.stream_server~~
	~~e : TB016635.tboam_app~~
	~~f : TB016635.tbrouter <------------tbrouter~~
	~~g : TB016635.tbsnmpagent~~
	~~h : TB016635.tbsyslog~~
	~~i : TB016635.tbuctwriter~~
	~~j : TB016635.toolpack_engine~~
	~~k : TB016635.toolpack_sys_mgr~~
	~~l : TB016635.web_server~~

	*Select the tbrouter application. (Letter 'f' in the above example)

	*Once you have access to the tbrouter application, press 'p'
	~~Capture circular buffer size (nb of packets)? : 50000 <-- set the number of packets to capture~~
	~~Capture mode (1:In 2:Out 4:Monitor) (ex: 3=In+out) : 4 <-- Select 4~~
	~~VLAN id (list, -1:All) (ex:151, 152, 153, 154) : -1~~
	~~Convert DSA tags to VLAN tags : Yes~~
	~~Capture only firewall-protected VLANs : Yes~~

	~~Press Enter to start the capture.~~

	~~=== Stop Capture ===~~
	~~Press 'P' (capital letter) to stop the capture.~~

	*Access the telecom baseboard from the TSBC-HW using telnet.
	~~telnet 172.16.123.45~~
	*Stop the capture
	~~mv88eMonitor 0 0 0~~

	~~=== Download Capture ===~~
	To download the voip_capture.cap file, use SSH secure copy ("sftp") to the TSBC-HW management port. This can be done on Windows using tools like [https://filezilla-project.org/ Filezilla] or [http://winscp.net/ WinSCP].<br />
	~~The file location of the capture is:~~
	~~/lib/tb/toolpack/tbrouter/pcap~~

	~~== References ==~~
	*[[VoIP_Ethernet_Capture\|VoIP Ethernet Capture]]
	*[[VoIP Ethernet Capture FreeSBC A\|FreeSBC VoIP Ethernet Capture]]

Luc Morissette: /* Capturing using the internal host of the FreeSBC */

2019-01-09T19:46:29Z

Capturing using the internal host of the FreeSBC

← Older revision		Revision as of 15:46, 9 January 2019
Line 3:		Line 3:
	{{DISPLAYTITLE:VoIP Ethernet Capture TSBC-HW}}		{{DISPLAYTITLE:VoIP Ethernet Capture TSBC-HW}}

	== Capturing using the internal host of the ~~FreeSBC~~==		== Capturing using the internal host of the TSBC-HW ==
	The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.		The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.

Luc Morissette at 19:46, 9 January 2019

2019-01-09T19:46:11Z

← Older revision		Revision as of 15:46, 9 January 2019
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
	=== '''''Applies to version(s): v3.0''''' ===		=== '''''Applies to version(s): v3.0''''' ===
	{{DISPLAYTITLE:VoIP Ethernet Capture ~~FreeSBC~~}}		{{DISPLAYTITLE:VoIP Ethernet Capture TSBC-HW}}

	== Capturing using the internal host of the ~~TSBC-HW unit~~==		== Capturing using the internal host of the FreeSBC==
	The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.		The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.

Luc Morissette: /* Applies to version(s): v3.0 */

2019-01-09T19:44:22Z

Applies to version(s): v3.0

← Older revision		Revision as of 15:44, 9 January 2019
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
	=== '''''Applies to version(s): v3.0''''' ===		=== '''''Applies to version(s): v3.0''''' ===
	{{DISPLAYTITLE:VoIP Ethernet Capture ~~TSBC-HW~~}}		{{DISPLAYTITLE:VoIP Ethernet Capture FreeSBC}}

	== Capturing using the internal host of the TSBC-HW unit==		== Capturing using the internal host of the TSBC-HW unit==

Cbilodeau: moved VoIP Ethernet Capture SN10500 to VoIP Ethernet Capture TSBC-HW: Rename

2018-07-13T10:20:44Z

moved VoIP Ethernet Capture SN10500 to VoIP Ethernet Capture TSBC-HW: Rename

← Older revision	Revision as of 06:20, 13 July 2018
(No difference)

Luc Morissette: Replaced SN10500 with TSBC-HW

2018-07-12T21:16:08Z

Replaced SN10500 with TSBC-HW

← Older revision		Revision as of 17:16, 12 July 2018
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
	=== '''''Applies to version(s): v3.0''''' ===		=== '''''Applies to version(s): v3.0''''' ===
	{{DISPLAYTITLE:VoIP Ethernet Capture ~~SN10500~~}}		{{DISPLAYTITLE:VoIP Ethernet Capture TSBC-HW}}

	== Capturing using the internal host of the ~~SN10500~~ unit==		== Capturing using the internal host of the TSBC-HW unit==
	The internal host of the ~~SN10500~~ can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.		The internal host of the TSBC-HW can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.

	=== Start Capture ===		=== Start Capture ===
Line 10:		Line 10:

	'''Step 1'''		'''Step 1'''
	*Access the ~~SN10500~~ management interface using SSH. Then, access the telecom baseboard using telnet:		*Access the TSBC-HW management interface using SSH. Then, access the telecom baseboard using telnet:
	telnet [eth0 IP address of the telecom unit]		telnet [eth0 IP address of the telecom unit]

Line 41:		Line 41:
	'''Step 2'''		'''Step 2'''

	*Access the ~~SN10500~~ management interface using SSH<br />		*Access the TSBC-HW management interface using SSH<br />
	start tbx_cli_tools_remote		start tbx_cli_tools_remote
	[root@TB016635 ~]# tbx_cli_tools_remote		[root@TB016635 ~]# tbx_cli_tools_remote
Line 76:		Line 76:
	Press 'P' (capital letter) to stop the capture.		Press 'P' (capital letter) to stop the capture.

	*Access the telecom baseboard from the ~~SN10500~~ using telnet.		*Access the telecom baseboard from the TSBC-HW using telnet.
	telnet 172.16.123.45		telnet 172.16.123.45
	*Stop the capture		*Stop the capture
Line 82:		Line 82:

	=== Download Capture ===		=== Download Capture ===
	To download the voip_capture.cap file, use SSH secure copy ("sftp") to the ~~SN10500~~ management port. This can be done on Windows using tools like [https://filezilla-project.org/ Filezilla] or [http://winscp.net/ WinSCP].<br />		To download the voip_capture.cap file, use SSH secure copy ("sftp") to the TSBC-HW management port. This can be done on Windows using tools like [https://filezilla-project.org/ Filezilla] or [http://winscp.net/ WinSCP].<br />
	The file location of the capture is:		The file location of the capture is:
	/lib/tb/toolpack/tbrouter/pcap		/lib/tb/toolpack/tbrouter/pcap

Nicole Tan at 21:20, 9 July 2018

2018-07-09T21:20:31Z

← Older revision		Revision as of 17:20, 9 July 2018
Line 1:		Line 1:
	__NOTOC__		__NOTOC__
	=== '''''Applies to version(s): v3.0''''' ===		=== '''''Applies to version(s): v3.0''''' ===
	{{DISPLAYTITLE:VoIP Ethernet Capture ~~TSBC5000~~}}		{{DISPLAYTITLE:VoIP Ethernet Capture SN10500}}

	== Capturing using the internal host of the SN10500 unit==		== Capturing using the internal host of the SN10500 unit==

Nicole Tan: NT: Created new page

2018-07-09T21:17:26Z

NT: Created new page

New page

__NOTOC__
=== '''''Applies to version(s): v3.0''''' ===
{{DISPLAYTITLE:VoIP Ethernet Capture TSBC5000}}

== Capturing using the internal host of the SN10500 unit==
The internal host of the SN10500 can be used for capturing packets that are mirrored from the VOIP0 and/or VOIP1 physical ports. This includes RTP traffic.

=== Start Capture ===
You need '''two''' SSH sessions to capture the traffic: 

'''Step 1'''
*Access the SN10500 management interface using SSH. Then, access the telecom baseboard using telnet:
telnet [eth0 IP address of the telecom unit]

For example

telnet 172.16.123.45

Prompt is now:
0/tbgw>
*Do command "mv88eMonitor" to get the PortMask and PortNumber:
mv88eMonitor

The output should be like this:
Port Mapping:
PortDesc : voip0 voip1 sw6352 fpga mgmt0 mgmt1 eth0 eth1 host sw6321 cpu
PortNumber : 0 1 2 3 4 5 6 7 8 9 10 11 12 13
PortMask : 0x1 0x2 0x4 0x8 0x10 0x20 0x40 0x80 0x100 0x200 0x400 0x800 0x1000 0x2000

*Use this command to capture VoIP0 traffic (for 600 seconds or 10 minutes):
mv88eMonitor 0x8 0x8 11 600
*Use this command to capture VoIP1 traffic:
mv88eMonitor 0x10 0x10 11 600

In the example, the duration is 600 seconds. This will capture traffic for 10 minutes.

Note: We do not recommend to keep capturing for a long time. This is only used for debugging purpose.
 
 

'''Step 2'''

*Access the SN10500 management interface using SSH 
start tbx_cli_tools_remote
[root@TB016635 ~]# tbx_cli_tools_remote

*Connect to tbrouter
(The following is displayed:)
Available remote hosts to control (TBX_GW_PORT=12358, local IPs 172.16.0.1 / 172.18.0.1). Press corresponding letter to
control:
a : TB016634.tbrouter
b : TB016635.gateway
c : TB016635.logtrace
d : TB016635.stream_server
e : TB016635.tboam_app
f : TB016635.tbrouter <------------tbrouter
g : TB016635.tbsnmpagent
h : TB016635.tbsyslog
i : TB016635.tbuctwriter
j : TB016635.toolpack_engine
k : TB016635.toolpack_sys_mgr
l : TB016635.web_server

*Select the tbrouter application. (Letter 'f' in the above example)

*Once you have access to the tbrouter application, press 'p'
Capture circular buffer size (nb of packets)? : 50000 <-- set the number of packets to capture
Capture mode (1:In 2:Out 4:Monitor) (ex: 3=In+out) : 4 <-- Select 4
VLAN id (list, -1:All) (ex:151, 152, 153, 154) : -1
Convert DSA tags to VLAN tags : Yes
Capture only firewall-protected VLANs : Yes

Press Enter to start the capture.

=== Stop Capture ===
Press 'P' (capital letter) to stop the capture.

*Access the telecom baseboard from the SN10500 using telnet.
telnet 172.16.123.45
*Stop the capture
mv88eMonitor 0 0 0

=== Download Capture ===
To download the voip_capture.cap file, use SSH secure copy ("sftp") to the SN10500 management port. This can be done on Windows using tools like [https://filezilla-project.org/ Filezilla] or [http://winscp.net/ WinSCP]. 
The file location of the capture is:
/lib/tb/toolpack/tbrouter/pcap

== References ==
*[[VoIP_Ethernet_Capture|VoIP Ethernet Capture]]
*[[VoIP Ethernet Capture FreeSBC A|FreeSBC VoIP Ethernet Capture]]