TB Wiki - User contributions [en]

3200 Series Gateway Standalone and 1+1

2024-06-02T13:36:01Z

Abaum: /* About this Guide */

{{DISPLAYTITLE:3200 Series Gateway Standalone and 1+1}}
<a href="#" id="hideToc">Hide TOC</a>
==Installation Guide==
=About this Guide=
----
This guide provides installation, and setup procedures for the 3200 series standalone and 3200 series 1+1 systems.
 
==Conventions==
----

{| class="wikitable sortable"
|+ Product Term Usage
|-
! Terminology !! Description
|-
| 3200 series gateway || This term is used when a description applies to both the 3200 series standalone and 3200 series 1+1 system.
|-
| 3200 series standalone|| This term is used when a description applies to the 3200 series unit operating as a standalone unit.
|-
| 3200 series 1+1 System|| This term is used when a description applies to the 3200 series unit operating in conjunction with the 3200+1 series unit. This term also includes the 1+1 patch panel.
|-
| 3200 series unit || This term is used when a description applies to all variations of the 3200 series units, such as: TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200 TSG3200-TE, TSG3200-DS3), or TMGIP3200.
|-
| 3200-TE || This term is used when a description applies to the TMG3200-TE and TSG3200-TE.
|-
| 3200-DS3|| This term is used when a description applies to the TMG3200-DS3 and TSG3200-DS3.
|-
| 3200-STM1|| This term is used when a description applies to the TMG3200-STM1 and TSG3200-STM1.
|-
| 3200 series +1 unit || This term is used when a description applies to all variations of the 3200 series +1 units, such as: TMG3200 +1 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 +1 (TSG3200-TE, TSG3200-DS3), or TMGIP3200 +1.
|-
| 1+1 Patch Panel|| This term is used as a generic reference to a 1+1 patch panel, which enables an 3200
series unit to connect to an 3200 series +1 unit.
|}

To help guide you in the installation of your product, we use the following icons in this document. Take note of the icon
that represents the type of installation you are conducting and follow those procedures throughout this guide to
ensure proper equipment installation and set up.

{| class="wikitable"
|+ Documentation Icons
|-
! Graphic !! Description
|-
| [[Image: icon_StandAlone.svg|100px]] || This icon appears in the margins of pages describing the 3200 series operating as a
standalone unit. If you are installing a standalone unit, read and follow the
instructions provided in those sections.
|-
| [[Image: icon_1+1.svg|100px]]|| This icon appears in the margins of pages describing the 3200 series unit operating in
conjunction with an 3200 series +1 and 1+1 patch panel. If you are installing a 1+1
system read and follow the instructions provided in those sections and pages.
|}
 

==Contact Us==
----
If you have comments about this guide or any other TelcoBridges technical documentation, please send an email to [mailto:marketing@telcobridges.com marketing].

=Introduction=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
This section provides an introduction of the installation and setup for the following
system configurations:
*'''3200 Series Standalone''': Single gateway unit operating in standalone mode.
*'''3200 series 1+1 system''': 3200 series unit operating in conjunction with an 3200 series +1 unit and 1+1 patch panel(s).

The following topics are covered:
*[[3200 Series Gateway Standalone and 1+1#Recognizing an 3200 Series Standalone versus an 3200 Series 1+1 System|Recognizing an 3200 Series Standalone versus an 3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Installation Prerequisites|Installation Prerequisites]]
*[[3200 Series Gateway Standalone and 1+1#Preventing Electrostatic Discharge Damage|Preventing Electrostatic Discharge Damage]]
*[[3200 Series Gateway Standalone and 1+1#Recommended Reading|Recommended Reading]]
 
==Recognizing a 3200 Series Standalone versus a 3200 Series 1+1 System==
----
===3200 Series Standalone===
----
The 3200 series standalone consists of one telecom unit.
 
===3200 Series 1+1 System===
----
The 3200 series 1+1 system consists of:
*One telecom unit
*One +1 telecom unit
*One or two 1+1 patch panels
[[File:AllUnitsProfess3200.png]]

'''3200 Series and 3200 Series +1 (Front and Rear Views)'''

[[File:AllPatchPanels3200.png]]

'''1+1 Patch Panels (Front and Rear Views)'''


==Installation Prerequisites==
----
[[File:Icon_StandAlone_1+1.svg|75px|left]]
For the installation to proceed without interruption, it is important that you have all necessary materials on hand.
{| class="wikitable"
|-
! '''3200 Series Standalone'''
! '''3200 Series 1+1 System'''
|-
| '''Adequate space for the installation of the 3200 series standalone.'''
You will need to mount the 800 series unit on a 19" equipment rack (customer provided). Your 3200 series unit is a 1U unit.

| '''Adequate space for the installation of the 3200 series 1+1 system.'''
You will need to mount the 800 series unit on a 19" equipment rack (customer provided). Your 3200 series unit is a 1U unit.

The 1+1 System requires space for the following number of units:

3200 Series Unit:        1U

3200 Series +1 Unit:   1U

1+1 Patch Panel(s):    1U/2Ua

Total:                            3U/4Ub
|-
| '''Adequate power supply and power connections.'''
The 3200 series unit requires two power connections to provide for its redundant power supply.

To guarantee an uninterrupted supply of electricity, each power connection must be fed by a dedicated power source.

| '''Adequate power supply and power connections.'''
The 3200 series and 3200 series +1 units require two power connections each, as they are equipped with redundant power supplies. To guarantee an uninterrupted supply, each power connection must be fed by a dedicated power source.
|-
| '''IP addresses for the management ports.'''
To avoid delays, you should have the IP address, netmask and gateway addresses on hand. Take note that the management port supports DHCP, see [[3200 Series Gateway Standalone and 1+1#Connecting_to_the_3200_Series_Gateway_Management_Interface|Connecting to the 3200 Series Gateway Management Interface]], for further information.
| '''IP addresses for the management ports.'''
To avoid delays, you should have the IP address, netmask and gateway addresses on hand. Take note that the management port supports DHCP, see [[3200 Series Gateway Standalone and 1+1#Connecting_to_the_3200_Series_Gateway_Management_Interface|Connecting to the 3200 Series Gateway Management Interface]], for further information.
|}
a: 1U per 1+1 patch panel, 2U if two patch panels are required

b: Depending on whether your system requires 1 or 2 patch panels. ''Refer to “3200 Series 1+1 System Package Contents”''
 

==Preventing Electrostatic Discharge Damage==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.

----
{|
|-
| [[File:WarningIcon.png]]

|Always follow ESD prevention procedures when removing and replacing modules:
* Ensure that the equipment is grounded.
* Wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the wrist strap clip to an unpainted surface of the equipment or the grounded equipment rack in order to channel away all ESD voltage safely to ground. To guard against ESD damage and shocks, the wrist strap and cord must be in proper working condition.
* If no wrist strap is available, and you must work with the equipment, ground yourself by touching a metal part of the chassis.
|}
----
 

==Recommended Reading==
----
This document is written with the assumption that you have a clear understanding of the installation of the equipment described in this document and you are trained to work with the equipment. If you have any technical questions, TelcoBridges TB Support can be reached at the following numbers, or an email can be sent to: [mailto:support@telcobridges.com support].

*Americas & Europe Technical Support Centre (GMT-05:00, Montreal): Telephone: +1-450-655-8993 x131 or x102
*Asia Technical Support Centre (GMT +08:00, Hong Kong): Telephone: +852-3749-9818
*24/7 International Support: Telephone: +1-866-438-4703
 

=Installing the Equipment=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
This section provides information about the following topics:
*[[3200 Series Gateway Standalone and 1+1#Package Contents|Package Contents]]
*[[3200 Series Gateway Standalone and 1+1#Rack_Mounting_the_3200 _Series_Standalone_or_the_3200 _Series_1+1_System|Rack Mounting the 3200 Series Standalone or the 3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Choosing your Connection Procedure|Choosing your Connection Procedure]]
*[[3200 Series Gateway Standalone and 1+1#3200 Series Standalone|3200 Series Standalone]]
*[[3200 Series Gateway Standalone and 1+1#3200 Series 1+1 System|3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Adding an 3200 +1 Unit to an Existing Standalone; Creating an 3200 series 1+1 System|Adding an 3200 +1 Unit to an Existing Standalone; Creating an 3200 series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Verifying the LED Status Indications|Verifying the LED Status Indications]]
*[[3200 Series Gateway Standalone and 1+1#Powering Down|Powering Down]]
 

 
==Package Contents==
----
Depending on your system requirements, you may receive one or more of the following items:
*3200 Series Standalone Package
*3200 Series 1+1 System Package
*1+1 Patch Panels

The contents of these packages are described in the following sections.
 
===3200 Series Standalone Package Contents===
----
'''TMG3200, TSG3200, TMGIP3200'''

In the box, you will find the following items:
*One 3200 series unit:
**TMG3200, TSG3200, or TMGIP3200

*One 3200 series unit:
**TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200-TE,TSG3200-DS3), or TMGIP3200.
*One set of mounting brackets and screws, used to mount the 3200 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing pertinent product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Specifically with the 3200-TE unit, you will also have:
*One or two patch panel(s)
*Two SCSI cables per patch panel.

Not included
• A 19” equipment rack. The 3200 series unit must be installed on a 19” wide equipment rack.
 

===3200 Series 1+1 System Package Contents===
----
[[File:Icon_1+1.svg|60px|right]]
In the box, you will find the following items:
*One 3200 series unit:
**TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200-TE, TSG3200-DS3), or TMGIP3200.
*One set of mounting brackets and screws, used to mount the 3200 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Not included
*A 19” equipment rack. The 3200 series unit must be installed on a 19” wide equipment rack.

'''TMG3200 +1, TSG3200 +1, TMGIP3200 +1'''

In the box, you will find the following items:
*One 3200 +1 series unit:
**TMG3200 +1 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 +1 (TSG3200-TE, TSG3200-DS3), or TMGIP3200 +1.
*One set of mounting brackets and screws, used to mount the 3200 +1 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 + 1 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing pertinent product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Not included
• A 19” equipment rack. The 3200 +1 series unit must be installed on a 19” wide equipment rack.
 

===1+1 Patch Panels===
1+1 patch panels are required for the proper connection of the 3200 series 1+1 system, and are automatically included when a 3200 +1 series unit is ordered. The following table lists the various 1+1 patch panels that you will receive based upon the type of 3200 series telecom unit integrated in your 3200 series 1+1 system.

{| class="wikitable"
|+ 1+1 Patch Panels
|-
| 1+1 Patch Panel (32/T1/E1)
| Provides connection for up to 32 T1/E1 lines from the network to the 3200-TE and 3200-TE+1.

To connect the 3200-TE-16 and the 3200-TE-32 to their respective +1 units and the network, you will required one 1+1 Patch Panel (32 T1/E1).

To connect the 3200-TE-48 and the 3200-TE-64 to their respective +1 units and the network, you will require two 1+1 Patch Panel (32 T1/E1).

Cables provided:
4 SCSI straight cables per 1+1 Patch Panel (32 T1/E1). Three meters in length. This provides connection for up to 32 lines.
|-
| 1+1 Patch Panel (DS3)
| Provides connection for up to 3 DS3 lines from the network to the 3200-DS3 and 3200-DS3+1.

Cables provided (with each 1+1 Patch Panel (DS3)):
*4 DS3 cables, each two meters in length, are shipped for each DS3 that is ordered. (4, 8, or 12 cables)
*4 RJ48C straight cables (yellow), two meters in length.
|-
| 1+1 Patch Panel (STM1)
| Provides connection of 1 STM1 line from the network to the 3200-STM1 and 3200-STM1+1.

Cables provided (with each 1+1 Patch Panel (STM1)):
*4 pairs of fiber optic cables, two meters in length.
*4 RJ48C straight cables (yellow), two meters in length.
|}

==Rack Mounting the 3200 Series Standalone or the 3200 Series 1+1 System==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
The 3200 series equipment is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box.
 
===Prerequisites===
----
To rack mount the equipment, you will need:
*One 19” customer-provided equipment rack. The rack must be solidly anchored to the floor with appropriate support at the top of the racks.
*Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
 

===Vertical Placement of the Equipment===
The 3200 series standalone, 3200 series +1, and 1+1 Patch Panel are each housed in a 1U chassis, as tabulated below. It is important that you provide for enough room on the equipment rack to allow for the installation of the equipment.

Consider the available space on your equipment rack and the height of the 3200 series gateway equipment. Due to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave any physical vertical space above or below the 3200 series gateway equipment on the equipment rack.

{| class="wikitable"
|+ 3200 Series Equipment Physical Height
|-
! Model !! Vertical Height
|-
| 3200 series standalone
| 1U (1.75 inches or 44.45 mm)
|-
| 3200 series +1
| 1U (1.75 inches or 44.45 mm)
|-
| Patch Panel (one or two)
| 1U (1.75 inches or 44.45 mm)
|}
 
===Rack Mounting the 3200 Series Standalone and the 3200 Series 1+1 System===
----
[[File:Icon_1+1.svg|60px|right]]
The 3200 series equipment is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box.
 

====Prerequisites====
To rack mount the equipment, you will need:
*One 19” customer-provided equipment rack. The rack must be solidly anchored to the floor with appropriate support at the top of the racks.
*Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
 

====Vertical Placement of the Equipment====
----
The 3200 series standalone and 3200 series +1 are each housed in a 1U chassis. It is important that you provide for enough room on the equipment rack to allow for the installation of the equipment.

Consider the available space on your equipment rack and the height of the 3200 series gateway equipment. Due to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave any physical vertical space above or below the 3200 series gateway equipment on the rack.

{| class="wikitable sortable"
|+ 3200 Series Gateway Physical Height
|-
! 3200 Series !! Vertical Height
|-
| 3200 series standalone|| 1U (1.75 inches or 44.45 mm)
|-
| 3200 +1 series|| 1U (1.75 inches or 44.45 mm)
|-
| Patch Panels|| 1U (1.75 inches or 44.45 mm)
|}

====Installing the 3200 Series Standalone and the 3200 Series 1+1 on an Equipment Rack====
----
[[File:Icon_Standalone.svg|60px|right]]
Both the 3200 series standalone and the 3200 series 1+1 system are mounted on the 19" equipment rack using the angle brackets and screws provided in the box.

# Using four metal screws, attach one angle bracket to the front, left-hand side of the 3200 series unit, when viewed from the front, as shown in figure 2.1 on page 12. Do the same for the angle bracket on the right-hand side.

==Choosing your Connection Procedure==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]

 

==Installing the 3200 Series Standalone==
----

 
===Connecting to the 3200 Series Gateway Management Interface===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Connecting to a VoIP Network===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Connecting to the PSTN===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Grounding the Equipment Chassis===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Powering Up===
----
[[File:Icon_StandAlone.svg|60px|right]]

 
====Connecting to AC Power====
----

 

====Connecting to DC Power====
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Start Up===
----
[[File:Icon_StandAlone.svg|60px|right]]

 
====Configuring the Role====
----

 

==Installing the 3200 Series 1+1==
----
[[File:Icon_1+1.svg|60px|right]]


===Connecting to the 3200 Series 1+1 System Management Interfaces===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the 3200 Series 1+1 System Control Network===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the 3200 Series 1+1 System VoIP Network(s)===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the PSTN in an 3200 Series 1+1 System===
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Grounding the Equipment Chassis===
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Powering Up===
----
[[File:Icon_1+1.svg|60px|right]]


====Connecting to AC Power====
----
[[File:Icon_1+1.svg|60px|right]]



====Connecting to DC Power====
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Start Up===
----
[[File:Icon_1+1.svg|60px|right]]



==Adding an 3200 +1 Unit to an Existing Standalone==
----


===Reconfigure a Standalone Unit as a Primary Unit in an 3200 Series 1+1 System===
----



===Install the 3200 Series +1 unit on the Equipment Rack===
----
[[File:Icon_1+1.svg|60px|right]]



===Connect to the 3200 Series 1+1 Management Interface===
----



===Connect to the 3200 Series 1+1 Control Network===
----



===Connect to the 3200 Series 1+1 VoIP Network(s)===
----



===Connecting to the PSTN Network===
----



===Powering Up the Equipment===
----



===Equipment Start Up===
----



==Verifying the LED Status Indications==
----



==Powering Down==
----


===Management Port===
----



===Power Button===
----



=Initial System Configuration=
----


==Series Gateway SSH Connection==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


=3200 Series Gateway Serial Connection==
----

===Physical Connection===
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


====Connecting to the USB Port of the 3200 Series Gateway====
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]



====Connecting to the Serial Port of the 3200 Series Gateway====
----



===Configuring the Terminal Emulator Application===
----



==Changing 3200 Series Gateway Management Port Passwords==
----



==Retrieving 3200 Series Gateway Information==
----



==Changing the 3200 Series Gateway Management Port IP Address==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]



==Setting the Time Zone==
----

{| class="wikitable"

|[[File:NoteIcon.png|100px]]|| The following procedure must be performed on the 3200 series standalone unit and the3200 series 1+1 system.
|}



==Changing VoIP Interface Addresses==
----



=System Backups=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


==Creating a Database Backup==
----



==Downloading a Database Backup==
----



==Uploading a Database Backup==
----



==Restoring a Database Backup==
----



=Wiring Diagrams=
----

==RJ48C Wiring Diagram: Crossover and Straight Cables==
----
[[File:Rj48cWiringSchematic.png]]


==Tmedia Serial Adapter Wiring Diagram==
----
[[File:ConsolePinout.png]]

3200 Series Gateway Standalone and 1+1

2024-06-02T13:35:34Z

Abaum: /* About this Guide */

{{DISPLAYTITLE:3200 Series Gateway Standalone and 1+1}}
<a href="#" id="hideToc">Hide TOC</a>
==Installation Guide==
=About this Guide=
----
This guide provides installation, and setup procedures for the 3200 series standalone and 3200 series 1+1 systems
 
==Conventions==
----

{| class="wikitable sortable"
|+ Product Term Usage
|-
! Terminology !! Description
|-
| 3200 series gateway || This term is used when a description applies to both the 3200 series standalone and 3200 series 1+1 system.
|-
| 3200 series standalone|| This term is used when a description applies to the 3200 series unit operating as a standalone unit.
|-
| 3200 series 1+1 System|| This term is used when a description applies to the 3200 series unit operating in conjunction with the 3200+1 series unit. This term also includes the 1+1 patch panel.
|-
| 3200 series unit || This term is used when a description applies to all variations of the 3200 series units, such as: TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200 TSG3200-TE, TSG3200-DS3), or TMGIP3200.
|-
| 3200-TE || This term is used when a description applies to the TMG3200-TE and TSG3200-TE.
|-
| 3200-DS3|| This term is used when a description applies to the TMG3200-DS3 and TSG3200-DS3.
|-
| 3200-STM1|| This term is used when a description applies to the TMG3200-STM1 and TSG3200-STM1.
|-
| 3200 series +1 unit || This term is used when a description applies to all variations of the 3200 series +1 units, such as: TMG3200 +1 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 +1 (TSG3200-TE, TSG3200-DS3), or TMGIP3200 +1.
|-
| 1+1 Patch Panel|| This term is used as a generic reference to a 1+1 patch panel, which enables an 3200
series unit to connect to an 3200 series +1 unit.
|}

To help guide you in the installation of your product, we use the following icons in this document. Take note of the icon
that represents the type of installation you are conducting and follow those procedures throughout this guide to
ensure proper equipment installation and set up.

{| class="wikitable"
|+ Documentation Icons
|-
! Graphic !! Description
|-
| [[Image: icon_StandAlone.svg|100px]] || This icon appears in the margins of pages describing the 3200 series operating as a
standalone unit. If you are installing a standalone unit, read and follow the
instructions provided in those sections.
|-
| [[Image: icon_1+1.svg|100px]]|| This icon appears in the margins of pages describing the 3200 series unit operating in
conjunction with an 3200 series +1 and 1+1 patch panel. If you are installing a 1+1
system read and follow the instructions provided in those sections and pages.
|}
 

==Contact Us==
----
If you have comments about this guide or any other TelcoBridges technical documentation, please send an email to [mailto:marketing@telcobridges.com marketing].

=Introduction=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
This section provides an introduction of the installation and setup for the following
system configurations:
*'''3200 Series Standalone''': Single gateway unit operating in standalone mode.
*'''3200 series 1+1 system''': 3200 series unit operating in conjunction with an 3200 series +1 unit and 1+1 patch panel(s).

The following topics are covered:
*[[3200 Series Gateway Standalone and 1+1#Recognizing an 3200 Series Standalone versus an 3200 Series 1+1 System|Recognizing an 3200 Series Standalone versus an 3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Installation Prerequisites|Installation Prerequisites]]
*[[3200 Series Gateway Standalone and 1+1#Preventing Electrostatic Discharge Damage|Preventing Electrostatic Discharge Damage]]
*[[3200 Series Gateway Standalone and 1+1#Recommended Reading|Recommended Reading]]
 
==Recognizing a 3200 Series Standalone versus a 3200 Series 1+1 System==
----
===3200 Series Standalone===
----
The 3200 series standalone consists of one telecom unit.
 
===3200 Series 1+1 System===
----
The 3200 series 1+1 system consists of:
*One telecom unit
*One +1 telecom unit
*One or two 1+1 patch panels
[[File:AllUnitsProfess3200.png]]

'''3200 Series and 3200 Series +1 (Front and Rear Views)'''

[[File:AllPatchPanels3200.png]]

'''1+1 Patch Panels (Front and Rear Views)'''


==Installation Prerequisites==
----
[[File:Icon_StandAlone_1+1.svg|75px|left]]
For the installation to proceed without interruption, it is important that you have all necessary materials on hand.
{| class="wikitable"
|-
! '''3200 Series Standalone'''
! '''3200 Series 1+1 System'''
|-
| '''Adequate space for the installation of the 3200 series standalone.'''
You will need to mount the 800 series unit on a 19" equipment rack (customer provided). Your 3200 series unit is a 1U unit.

| '''Adequate space for the installation of the 3200 series 1+1 system.'''
You will need to mount the 800 series unit on a 19" equipment rack (customer provided). Your 3200 series unit is a 1U unit.

The 1+1 System requires space for the following number of units:

3200 Series Unit:        1U

3200 Series +1 Unit:   1U

1+1 Patch Panel(s):    1U/2Ua

Total:                            3U/4Ub
|-
| '''Adequate power supply and power connections.'''
The 3200 series unit requires two power connections to provide for its redundant power supply.

To guarantee an uninterrupted supply of electricity, each power connection must be fed by a dedicated power source.

| '''Adequate power supply and power connections.'''
The 3200 series and 3200 series +1 units require two power connections each, as they are equipped with redundant power supplies. To guarantee an uninterrupted supply, each power connection must be fed by a dedicated power source.
|-
| '''IP addresses for the management ports.'''
To avoid delays, you should have the IP address, netmask and gateway addresses on hand. Take note that the management port supports DHCP, see [[3200 Series Gateway Standalone and 1+1#Connecting_to_the_3200_Series_Gateway_Management_Interface|Connecting to the 3200 Series Gateway Management Interface]], for further information.
| '''IP addresses for the management ports.'''
To avoid delays, you should have the IP address, netmask and gateway addresses on hand. Take note that the management port supports DHCP, see [[3200 Series Gateway Standalone and 1+1#Connecting_to_the_3200_Series_Gateway_Management_Interface|Connecting to the 3200 Series Gateway Management Interface]], for further information.
|}
a: 1U per 1+1 patch panel, 2U if two patch panels are required

b: Depending on whether your system requires 1 or 2 patch panels. ''Refer to “3200 Series 1+1 System Package Contents”''
 

==Preventing Electrostatic Discharge Damage==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.

----
{|
|-
| [[File:WarningIcon.png]]

|Always follow ESD prevention procedures when removing and replacing modules:
* Ensure that the equipment is grounded.
* Wear an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the wrist strap clip to an unpainted surface of the equipment or the grounded equipment rack in order to channel away all ESD voltage safely to ground. To guard against ESD damage and shocks, the wrist strap and cord must be in proper working condition.
* If no wrist strap is available, and you must work with the equipment, ground yourself by touching a metal part of the chassis.
|}
----
 

==Recommended Reading==
----
This document is written with the assumption that you have a clear understanding of the installation of the equipment described in this document and you are trained to work with the equipment. If you have any technical questions, TelcoBridges TB Support can be reached at the following numbers, or an email can be sent to: [mailto:support@telcobridges.com support].

*Americas & Europe Technical Support Centre (GMT-05:00, Montreal): Telephone: +1-450-655-8993 x131 or x102
*Asia Technical Support Centre (GMT +08:00, Hong Kong): Telephone: +852-3749-9818
*24/7 International Support: Telephone: +1-866-438-4703
 

=Installing the Equipment=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
This section provides information about the following topics:
*[[3200 Series Gateway Standalone and 1+1#Package Contents|Package Contents]]
*[[3200 Series Gateway Standalone and 1+1#Rack_Mounting_the_3200 _Series_Standalone_or_the_3200 _Series_1+1_System|Rack Mounting the 3200 Series Standalone or the 3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Choosing your Connection Procedure|Choosing your Connection Procedure]]
*[[3200 Series Gateway Standalone and 1+1#3200 Series Standalone|3200 Series Standalone]]
*[[3200 Series Gateway Standalone and 1+1#3200 Series 1+1 System|3200 Series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Adding an 3200 +1 Unit to an Existing Standalone; Creating an 3200 series 1+1 System|Adding an 3200 +1 Unit to an Existing Standalone; Creating an 3200 series 1+1 System]]
*[[3200 Series Gateway Standalone and 1+1#Verifying the LED Status Indications|Verifying the LED Status Indications]]
*[[3200 Series Gateway Standalone and 1+1#Powering Down|Powering Down]]
 

 
==Package Contents==
----
Depending on your system requirements, you may receive one or more of the following items:
*3200 Series Standalone Package
*3200 Series 1+1 System Package
*1+1 Patch Panels

The contents of these packages are described in the following sections.
 
===3200 Series Standalone Package Contents===
----
'''TMG3200, TSG3200, TMGIP3200'''

In the box, you will find the following items:
*One 3200 series unit:
**TMG3200, TSG3200, or TMGIP3200

*One 3200 series unit:
**TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200-TE,TSG3200-DS3), or TMGIP3200.
*One set of mounting brackets and screws, used to mount the 3200 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing pertinent product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Specifically with the 3200-TE unit, you will also have:
*One or two patch panel(s)
*Two SCSI cables per patch panel.

Not included
• A 19” equipment rack. The 3200 series unit must be installed on a 19” wide equipment rack.
 

===3200 Series 1+1 System Package Contents===
----
[[File:Icon_1+1.svg|60px|right]]
In the box, you will find the following items:
*One 3200 series unit:
**TMG3200 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 (TSG3200-TE, TSG3200-DS3), or TMGIP3200.
*One set of mounting brackets and screws, used to mount the 3200 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Not included
*A 19” equipment rack. The 3200 series unit must be installed on a 19” wide equipment rack.

'''TMG3200 +1, TSG3200 +1, TMGIP3200 +1'''

In the box, you will find the following items:
*One 3200 +1 series unit:
**TMG3200 +1 (TMG3200-TE, TMG3200-DS3, or TMG3200-STM1), or TSG3200 +1 (TSG3200-TE, TSG3200-DS3), or TMGIP3200 +1.
*One set of mounting brackets and screws, used to mount the 3200 +1 series unit to a 19" rack.
*One DB-9 to RJ-45 adapter to interface the serial port of your computer with the RJ-45 port of the 3200 + 1 series unit.
*Three CAT5 Ethernet (blue) straight cables (male-male), 3 meters in length.
*One Important Notice (two-sided document containing pertinent product serial numbers, and other important information).
*One Product Warranty.
*One packing slip.
*Two AC power cables

Not included
• A 19” equipment rack. The 3200 +1 series unit must be installed on a 19” wide equipment rack.
 

===1+1 Patch Panels===
1+1 patch panels are required for the proper connection of the 3200 series 1+1 system, and are automatically included when a 3200 +1 series unit is ordered. The following table lists the various 1+1 patch panels that you will receive based upon the type of 3200 series telecom unit integrated in your 3200 series 1+1 system.

{| class="wikitable"
|+ 1+1 Patch Panels
|-
| 1+1 Patch Panel (32/T1/E1)
| Provides connection for up to 32 T1/E1 lines from the network to the 3200-TE and 3200-TE+1.

To connect the 3200-TE-16 and the 3200-TE-32 to their respective +1 units and the network, you will required one 1+1 Patch Panel (32 T1/E1).

To connect the 3200-TE-48 and the 3200-TE-64 to their respective +1 units and the network, you will require two 1+1 Patch Panel (32 T1/E1).

Cables provided:
4 SCSI straight cables per 1+1 Patch Panel (32 T1/E1). Three meters in length. This provides connection for up to 32 lines.
|-
| 1+1 Patch Panel (DS3)
| Provides connection for up to 3 DS3 lines from the network to the 3200-DS3 and 3200-DS3+1.

Cables provided (with each 1+1 Patch Panel (DS3)):
*4 DS3 cables, each two meters in length, are shipped for each DS3 that is ordered. (4, 8, or 12 cables)
*4 RJ48C straight cables (yellow), two meters in length.
|-
| 1+1 Patch Panel (STM1)
| Provides connection of 1 STM1 line from the network to the 3200-STM1 and 3200-STM1+1.

Cables provided (with each 1+1 Patch Panel (STM1)):
*4 pairs of fiber optic cables, two meters in length.
*4 RJ48C straight cables (yellow), two meters in length.
|}

==Rack Mounting the 3200 Series Standalone or the 3200 Series 1+1 System==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]
The 3200 series equipment is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box.
 
===Prerequisites===
----
To rack mount the equipment, you will need:
*One 19” customer-provided equipment rack. The rack must be solidly anchored to the floor with appropriate support at the top of the racks.
*Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
 

===Vertical Placement of the Equipment===
The 3200 series standalone, 3200 series +1, and 1+1 Patch Panel are each housed in a 1U chassis, as tabulated below. It is important that you provide for enough room on the equipment rack to allow for the installation of the equipment.

Consider the available space on your equipment rack and the height of the 3200 series gateway equipment. Due to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave any physical vertical space above or below the 3200 series gateway equipment on the equipment rack.

{| class="wikitable"
|+ 3200 Series Equipment Physical Height
|-
! Model !! Vertical Height
|-
| 3200 series standalone
| 1U (1.75 inches or 44.45 mm)
|-
| 3200 series +1
| 1U (1.75 inches or 44.45 mm)
|-
| Patch Panel (one or two)
| 1U (1.75 inches or 44.45 mm)
|}
 
===Rack Mounting the 3200 Series Standalone and the 3200 Series 1+1 System===
----
[[File:Icon_1+1.svg|60px|right]]
The 3200 series equipment is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box.
 

====Prerequisites====
To rack mount the equipment, you will need:
*One 19” customer-provided equipment rack. The rack must be solidly anchored to the floor with appropriate support at the top of the racks.
*Climate controlled room: 0 to +50 Celsius, 0 to 95% non-condensing humidity.
 

====Vertical Placement of the Equipment====
----
The 3200 series standalone and 3200 series +1 are each housed in a 1U chassis. It is important that you provide for enough room on the equipment rack to allow for the installation of the equipment.

Consider the available space on your equipment rack and the height of the 3200 series gateway equipment. Due to the rear-exhaust heat vents and the efficient heat dissipation design, there is no need to leave any physical vertical space above or below the 3200 series gateway equipment on the rack.

{| class="wikitable sortable"
|+ 3200 Series Gateway Physical Height
|-
! 3200 Series !! Vertical Height
|-
| 3200 series standalone|| 1U (1.75 inches or 44.45 mm)
|-
| 3200 +1 series|| 1U (1.75 inches or 44.45 mm)
|-
| Patch Panels|| 1U (1.75 inches or 44.45 mm)
|}

====Installing the 3200 Series Standalone and the 3200 Series 1+1 on an Equipment Rack====
----
[[File:Icon_Standalone.svg|60px|right]]
Both the 3200 series standalone and the 3200 series 1+1 system are mounted on the 19" equipment rack using the angle brackets and screws provided in the box.

# Using four metal screws, attach one angle bracket to the front, left-hand side of the 3200 series unit, when viewed from the front, as shown in figure 2.1 on page 12. Do the same for the angle bracket on the right-hand side.

==Choosing your Connection Procedure==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]

 

==Installing the 3200 Series Standalone==
----

 
===Connecting to the 3200 Series Gateway Management Interface===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Connecting to a VoIP Network===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Connecting to the PSTN===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Grounding the Equipment Chassis===
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Powering Up===
----
[[File:Icon_StandAlone.svg|60px|right]]

 
====Connecting to AC Power====
----

 

====Connecting to DC Power====
----
[[File:Icon_StandAlone.svg|60px|right]]

 

===Standalone: Start Up===
----
[[File:Icon_StandAlone.svg|60px|right]]

 
====Configuring the Role====
----

 

==Installing the 3200 Series 1+1==
----
[[File:Icon_1+1.svg|60px|right]]


===Connecting to the 3200 Series 1+1 System Management Interfaces===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the 3200 Series 1+1 System Control Network===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the 3200 Series 1+1 System VoIP Network(s)===
----
[[File:Icon_1+1.svg|60px|right]]



===Connecting to the PSTN in an 3200 Series 1+1 System===
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Grounding the Equipment Chassis===
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Powering Up===
----
[[File:Icon_1+1.svg|60px|right]]


====Connecting to AC Power====
----
[[File:Icon_1+1.svg|60px|right]]



====Connecting to DC Power====
----
[[File:Icon_1+1.svg|60px|right]]



===3200 Series 1+1: Start Up===
----
[[File:Icon_1+1.svg|60px|right]]



==Adding an 3200 +1 Unit to an Existing Standalone==
----


===Reconfigure a Standalone Unit as a Primary Unit in an 3200 Series 1+1 System===
----



===Install the 3200 Series +1 unit on the Equipment Rack===
----
[[File:Icon_1+1.svg|60px|right]]



===Connect to the 3200 Series 1+1 Management Interface===
----



===Connect to the 3200 Series 1+1 Control Network===
----



===Connect to the 3200 Series 1+1 VoIP Network(s)===
----



===Connecting to the PSTN Network===
----



===Powering Up the Equipment===
----



===Equipment Start Up===
----



==Verifying the LED Status Indications==
----



==Powering Down==
----


===Management Port===
----



===Power Button===
----



=Initial System Configuration=
----


==Series Gateway SSH Connection==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


=3200 Series Gateway Serial Connection==
----

===Physical Connection===
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


====Connecting to the USB Port of the 3200 Series Gateway====
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]



====Connecting to the Serial Port of the 3200 Series Gateway====
----



===Configuring the Terminal Emulator Application===
----



==Changing 3200 Series Gateway Management Port Passwords==
----



==Retrieving 3200 Series Gateway Information==
----



==Changing the 3200 Series Gateway Management Port IP Address==
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]



==Setting the Time Zone==
----

{| class="wikitable"

|[[File:NoteIcon.png|100px]]|| The following procedure must be performed on the 3200 series standalone unit and the3200 series 1+1 system.
|}



==Changing VoIP Interface Addresses==
----



=System Backups=
----
[[File:Icon_StandAlone_1+1.svg|75px|right]]


==Creating a Database Backup==
----



==Downloading a Database Backup==
----



==Uploading a Database Backup==
----



==Restoring a Database Backup==
----



=Wiring Diagrams=
----

==RJ48C Wiring Diagram: Crossover and Straight Cables==
----
[[File:Rj48cWiringSchematic.png]]


==Tmedia Serial Adapter Wiring Diagram==
----
[[File:ConsolePinout.png]]

3200 Series Gateway Standalone and 1+1

2024-05-28T13:06:50Z

Abaum: Test of recent changes alert

Tmedia Overview

2023-04-23T17:07:58Z

Abaum:

=TMG800=
[[Image:tbwiki big tmg800 front.png|thumb|350px|Front view TMG800]] [[Image:TMG800 back view AC.png|thumb|350px|Rear view TMG800 AC]]

Software upgradeable from 1 to 16 T1/E1s, makes the the TelcoBridges [[Tmedia]]™ TMG800 a perfect entry-level [[VoIP]] gateway choice. It is the most cost effective, (1U) VoIP gateway solution in a single box currently available on the market. 

'''Characteristics of the TMG800'''
*1U VoIP gateway
*32 to 512 VoIP channels
*1 to 16 T1/E1s
*Software upgradeable by single T1/E1 increments (32 VoIP channels increment)
*Dual feed redundant AC or DC power supplies
*Tmedia 1+1 solution option

'''Available configurations'''
*TMG800-1, (1 x T1/E1, 32 x VoIP)
*TMG800-2, (2 x T1/E1, 64 x VoIP)
*TMG800-3, (3 x T1/E1, 96 x VoIP)
*TMG800-4, (4 x T1/E1, 128 x VoIP)
*TMG800-5, (5 x T1/E1, 160 x VoIP)
*TMG800-6, (6 x T1/E1, 192 x VoIP)
*TMG800-7, (7 x T1/E1, 224 x VoIP)
*TMG800-8, (8 x T1/E1, 256 x VoIP)
*TMG800-9, (9 x T1/E1, 288 x VoIP)
*TMG800-10, (10 x T1/E1, 320 x VoIP)
*TMG800-11, (11 x T1/E1, 352 x VoIP)
*TMG800-12, (12 x T1/E1, 384 x VoIP)
*TMG800-13, (13 x T1/E1, 416 x VoIP)
*TMG800-14, (14 x T1/E1, 448 x VoIP)
*TMG800-15, (15 x T1/E1, 480 x VoIP)
*TMG800-16, (16 x T1/E1, 512 x VoIP)

Each configuration is available with dual redundant AC or DC power.

'''References'''
*[https://telcobridges.com/products-tmedia-voip-gateways-tmg800-datasheet/ TMG800 Data sheet]
*[[Product_Installation|TMG800 Installation guide]]
*[[T1/E1/J1 RJ48 Cable Diagram|T1/E1/J1 RJ48 Wiring Diagram for Straight and Crossover Cables]]
*[[Regulatory compliance]]

For more information about the TMG800, go to [http://www.telcobridges.com/en/tmg800.aspx?modeaffichage=2 TelcoBridges website.]

'''Related Articles'''
*[[Tmedia_Comparison|Tmedia model comparison]]
*[[:Category:Tmedia_Features| Features]]
*[[:Category:Tmedia_Solutions|Solutions]]
*[[:Category:Tmedia_OAM%26P|OAM&P]]

=TMG3200=
[[Image:800 3200 angle front.png|thumb|350px|TMG3200 front view, 1U VoIP gateway]]
[[Image:Tbwiki_big_tmg800_front.png |thumb|350px|Front view of TMG3200-TE/DS3/STM1, 1U VoIP / Media Gateway]]
[[Image:3200_straight_rear_te.png|thumb|350px|Rear view of TMG3200-TE, 1U VoIP / Media Gateway]]
[[Image:3200_straight_rear_ds3.png |thumb|350px|Rear view of TMG3200-DS3, 1U VoIP / Media Gateway]]
[[Image:3200_straight_rear_stm1.png |thumb|350px|Rear view of TMG3200-STM1, 1U VoIP / Media Gateway]]

The TelcoBridges [[Tmedia]]™ gateways are available in a variety of models providing a choice in TDM density and connectivity as follows:
*TMG3200-TE
*TMG3200-DS3
*TMG3200-STM1

'''TMG3200-TE'''
The TelcoBridges [[Tmedia]]™ TMG3200-TE is a 16 to 64 T1/E1 [[VoIP]] gateway that offers high-capacity and high-performance in a single box (1U) solution. 

'''Characteristics of the TMG3200-TE'''
*1U VoIP gateway 
*512 to 2048 VoIP channels 
*16 to 64 T1/E1s 
*Simple field upgrade by increments of 16 T1/E1 (512 VoIP channel increments)
*Available features: hardware ready, facilitating capacity increase through license upgrade 
*Redundant AC or DC power supplies
 

'''Available configurations'''
*TMG3200-TE16, (16 x T1/E1, 512 x VoIP)
*TMG3200-TE32, (32 x T1/E1, 1024 x VoIP)
*TMG3200-TE48, (48 x T1/E1, 1536 x VoIP)
*TMG3200-TE64, (64 x T1/E1, 2048 x VoIP)

Each configuration is available with redundant AC or DC power.
 

'''TMG3200-DS3'''

The TelcoBridges [[Tmedia]]™ TMG3200-DS3 is a 1 to 3 DS3 VoIP gateway that offers high-performance in a single box (1U) solution. 

'''Characteristics of the TMG3200-DS3'''
*1U VoIP gateway 
*672 to 2016 VoIP channels 
*1 to 3 DS3 
*Simple field upgrade by increments of 1 DS3 (672 VoIP channel increments) 
*Available features: hardware ready, facilitating capacity increase through license upgrade 
*Redundant AC or DC power supplies
 

'''Available configurations'''
*TMG3200-DS31, (1 x DS3, 672 x VoIP)
*TMG3200-DS32, (2 x DS3, 1344 x VoIP)
*TMG3200-DS33, (3 x DS3, 2016 x VoIP)

Each configuration is available with redundant AC or DC power.
 

'''TMG3200-STM1'''
The TelcoBridges [[Tmedia]]™ TMG3200-STM1 is a 1 OC3/STM1 VoIP gateway that offers the industry's highest density in a single box (1U) solution. 

'''Characteristics of the TMG3200-STM1'''
*1U VoIP gateway 
*2,016 VoIP channels 
*1 OC3/STM1 
*Redundant AC or DC power supplies
 

'''Available configurations'''

*TMG3200-STM1, (1 x STM1, 2048 x VoIP)

Each configuration is available with redundant AC or DC power.

'''SFP modules compatibility'''
*850 nm 550 m multi-mode fiber (SX)
*1310 nm 10 km single-mode fiber (LX)
*1490 nm 10 km single-mode fiber (BS-D)
*1550 nm 40 km (XD), 80 km (ZX), 120 km (EX or EZX)]
*1490 nm 1310 nm (BX), Single Fiber Bi-Directional Gigabit SFP Transceivers
*DWDM
*STM1E-SFPxx 155Mbps Copper Transceiver

We normally sell SFP-LC (1310nm) hotplug, which we have in stock.

 
See [http://www.telcobridges.com/en/tmg3200.aspx TMG3200] to learn more about this product.

'''Product Information'''
*[[Datasheet|TMG3200 Datasheet]]

'''Technical Documentation'''
*[[Gateway_Installation|TMG3200 Installation Guide]]
*[[T1/E1/J1_RJ48_Cable_Diagram|T1/E1/J1 RJ48 Wiring Diagram for Straight and Crossover Cables]]
*[[Regulatory compliance]]

=TMG7800=
[[Image:7800_straight_front.png|thumb|350px| Front view of a TMG7800 VoIP gateway cluster]]

[[Image:Imb_x3250_straight_front.png|thumb|350px| Front view of TMG7800-CTRL VoIP gateway controller]]
[[Image:Imb_x3250_straight_back.png|thumb|350px| Front view of TMG7800-CTRL VoIP gateway controller]]
The TMG7800 VoIP gateway meets your system requirements by providing you with up to 131,072 universal voice ports (32,768 per cluster) and a flexibility to switch between TDM and IP. This capability is enhanced by being able to support a vast selection of signaling protocols, such as SS7, ISDN PRI, SIGTRAN, SIP, SIP-I/SIP-T and H.248, as well as a wide range of media processing codecs across a mix of T1/E1, DS3 and OC3/STM-1 interfaces, all within the same system.
 

The TelcoBridges Tmedia TMG7800 high availability system says it all. This multi-unit VoIP gateway is scalable and 100% redundant ensuring an infallible carrier-grade network. Leveraging redundant integrated VoIP gateway controllers, the TMG7800 delivers core network applications such as VoIP gateway, TDM switching, VoIP hairpinning with [[transcoding]], with advanced [[call routing]] and fax over IP. The TMG7800 can also host additional third-party applications such as softswitches and session border controllers locally, further answering the need for device consolidation and convergence. With separate chipsets for media processing and separate processors for call routing and signaling, the TMG7800 VoIP gateway provides full low-latency non-blocking capability for up to 32,768 channels per cluster. Up to 4 clusters can be included within a single TMG7800 system creating a 131,072 channels non-blocking switch. 

The TMG7800 VoIP gateway provides the ultimate in flexibility, easily scaling to a fully configured capacity of 1024 T1/E1, 48 DS3 or 16 OC3/STM-1 interfaces per cluster as service uptake increases, with the ability to mix and match different interface types.

A TMG7800 system consists of four (4) distinct hardware devices:

*TMG7800-CTRL: This is the system's controller. It performs call handling, call routing, CDR collection, and system configuration management. The TMG7800-CTRL also presents the system's Web Portal for OAM&P. The TMG7800-CTRL supports redundnacy.
*TMG7800-TE or -DS3 or -STM1: These are the gateway units that form the TMG7800 system. These gateway units provide the T1, E1, DS3 and/or OC3/STM-1 links and VoIP port capacity required to deliver the desired voice channel capacity. The TMG7800 gateway units are controlled by the TMG7800-CTRL controllers.
*TMG7800-TMS: This device is optional. The TMG7800-TMS is a non-blocking media switch that enables port to port switching between the TMG7800 gateway units of the same cluster. The TMG7800-TMS uses an any-to-any TDM switching fabric to minimize delay and maximize voice quality (unlike other technologies that use a packet technology that introduces delay). The TMG7800-TMS can switch a call terminating on any TMG7800 gateway unit to any other TMG7800 gateway unit of the cluster. This is particularly useful when the TMG7800 system needs to provide TDM switching services. The TMG7800-TMS also supports redundancy.

'''Characteristics'''
*3 to 22U VoIP gateway per cluster
*256 to 32,768 VoIP channels per cluster
*16 to 1024 T1/E1 or 1 to 48 DS3 or 1 to 16 OC3/STM1 per cluster
*Up to 4 clusters within a single system
*Redundant AC or DC power supplies

'''Available configurations'''
*TMG7800-CTRL, (VoIP server)
*TMG7800-TE16, (16 x T1/E1, 512 x VoIP)
*TMG7800-TE32, (32 x T1/E1, 1024 x VoIP)
*TMG7800-TE48, (48 x T1/E1, 1536 x VoIP)
*TMG7800-TE64, (64 x T1/E1, 2048 x VoIP)
*TMG7800-DS31, (1 x DS3, 672 x VoIP)
*TMG7800-DS32, (2 x DS3, 1344 x VoIP)
*TMG7800-DS33, (3 x DS3, 2016 x VoIP)
*TMG7800-STM1, (1 x STM1, 2048 x VoIP)
*TMG7800-TMS, (media switching fabric)
 
Each configuration is available with redundant AC or DC power.
 
 
See [http://www.telcobridges.com/en/tmg7800.aspx TMG7800 web site] to learn more about this product.

'''References'''
*[[Datasheet|TMG7800 Datasheet]]
*[[Gateway_Installation#Tmedia|TMG7800 Installation Guide]]
*[[Regulatory compliance]]

<headertabs/>

SIP Emergency

2023-04-21T17:36:23Z

Abaum: /* Example configuration */

== SIP Emergency ==

The SIP Emergency Call Handling allow for the identification of emergency SIP calls and their reservation of licensed resources.

SIP Emergency Call Handling configuration contains a list of rules to verify against when receiving a SIP Invite message. Each rule contains a condition. During establishment of a SIP session each rule are tested. When one rule matches the remaining rules are skipped. When a SIP session matches the condition of a SIP Emergency call handling rule, the SIP session is flagged as an emergency call and reserved resources are allocated to the session.

== SIP Emergency Call Legs Reserved ==

The Call Legs Reserved parameter specify the number of SIP UA call legs reserved for emergency calls and cannot be used for normal calls. There is 2 SIP UA call legs per SIP session. Must be inferior to the license total SIP UA call legs. However, emergency calls can go over 'Calls Legs Reserved' as long as there are unused SIP UA call legs left in the license.

== SIP Emergency Inbound Rules ==

A SIP Emergency Call Handling Inbound Rules consist of 3 parameters, Name, Header Containing the Service, and Identifier of Service.

== Header Containing the Service ==

This parameter indicates for a given rule the SIP header that should be used to try to match a SIP Emergency Call.

Here is the list of supported Header Types:

*'''Request-URI'''
*'''To-URI'''
*'''Resource-Priority'''
*'''P-Asserted-ID'''
*'''Priority'''

== Identifier of Service ==

This parameter indicates for a given rule the value that should be present in the header identified by 'Header Containing the Service' to match the rule.

== Configuration ==

*[[Toolpack:Tsbc_Protocol_Stack_Settings_3.1|v3.1: SIP Emergency]]

== Example configuration ==
In this configuration 40 call legs are reserved for SIP Emergency call Handling and a rule is configured using the P_Asserted_Identity header. 
[[File:SIP_Emergency.png|900px|SIP_Emergency.png]] 
 
Here a SIP Emergency Inbound Rule is being edited. It shows the selected header and the token the header in the SIP Invite should contains to match the rule. 
[[File:SIP_Emergency_rule.png|900px|SIP_Emergency_rule.png]] 
 

[[category:Glossary]]
[[Category:Revise on Major]]

SBC Installation

2023-03-08T15:26:13Z

Abaum:

{{DISPLAYTITLE:FreeSBC/ProSBC:Product Installation}}
__NOTOC__
The following is a list of product installation manuals for TelcoBridges' SBC:

'''FreeSBC/ProSBC'''
*[[FreeSBC:Baremetal:Installation_A|Baremetal Installation Instructions]]
*[[FreeSBC:Cloud:OpenStack_Installation_A|OpenStack Installation Instructions]]
*[[FreeSBC:Cloud:VmWare_Installation_A|VmWare Installation Instructions]]
*[[FreeSBC:Cloud:AWS_Installation_A|AWS installation instructions]]
*[[FreeSBC:Cloud:Azure_Installation_A|Azure installation instructions]]

'''Older documents'''
*[[Media:Tsbc-hw-srv Installation Guide Issue1.0.pdf|TSBC-HW-SRV-HIGH/MID System Installation Guide]]

'''Useful Links'''
*SBC configuration can be found here: [[Sbc_Tutorial_Guide_Intro|SBC Configuration]]
*Tmedia installation can be found here: [[Product_Installation|Installing Tmedia]]

SBC Installation

2023-03-08T15:25:42Z

Abaum:

{{DISPLAYTITLE:FreeSBC/ProSBC:Product Installation}}
__NOTOC__
The following is a list of product installation manuals for TelcoBridges' SBC:

'''FreeSBC/ProSBC'''
*[[FreeSBC:Baremetal:Installation_A|Baremetal Installation Instructions..]]
*[[FreeSBC:Cloud:OpenStack_Installation_A|OpenStack Installation Instructions]]
*[[FreeSBC:Cloud:VmWare_Installation_A|VmWare Installation Instructions]]
*[[FreeSBC:Cloud:AWS_Installation_A|AWS installation instructions]]
*[[FreeSBC:Cloud:Azure_Installation_A|Azure installation instructions]]

'''Older documents'''
*[[Media:Tsbc-hw-srv Installation Guide Issue1.0.pdf|TSBC-HW-SRV-HIGH/MID System Installation Guide]]

'''Useful Links'''
*SBC configuration can be found here: [[Sbc_Tutorial_Guide_Intro|SBC Configuration]]
*Tmedia installation can be found here: [[Product_Installation|Installing Tmedia]]

Tmedia Configuration

2023-03-08T14:59:59Z

Abaum:

{{DISPLAYTITLE:''T''media Tutorial Guide Introduction}}
__NOTOC__
The Web Portal is the principal way to interact with the session border controller, [[Tmedia]] VoIP gateway, [[Ttrans]] VoIP transcoding gateway, [[Tsig]] Signaling/SIGTRAN gateway, [[Tmonitor]] network-monitoring probe or [[Tdev]] development platform. It is how the actual configuration of the device takes place. Using the Web Portal you tell the device about the available network resources, how to manage the different [[Voice codecs|media formats]] that may be encountered, as well as how to originate, respond to, and manage phone calls or faxes.

With its operations, maintenance, administration and provisioning (OAM&P) capabilities, the Web Portal is also the principal interface for day-to-day interactions with the equipment, such as viewing statistics and alarms, providing continuous system performance and health monitoring.

You can also use the Web Portal for more point-in-time requirements, such as performing software upgrades, modifying existing production systems to meet new business requirements, or adding new devices or capacity to existing production systems.

The Web Portal also facilitates configuration management, with the ability to create, validate, and then push out new device configurations. It also supports the ability to easily roll back to previous production configurations as well.

== Connecting to the Web Portal. ==
You connect to the Web Portal with a web browser such as Internet Explorer, Mozilla Firefox or Google Chrome. The address you connect to will be either the LAN machine name or the IP address of the device, followed by the port number. The default port number is 12358. 

Example (if the management IP address is 192.168.0.100):
<pre> http://192.168.0.100:12358 </pre>

== Toolpack Web Portal Versions ==
For specific information on Toolpack, please refer to the Toolpack Web Portal tutorial specific to your installed version of Toolpack:
{|style="text-align: left;"
!width="210"|ProSBC/FreeSBC
!width="210"|''T''media ''T''sig
|-
|[[Sbc Tutorial Guide v3.1|Version 3.1]]
|[[Tmedia Tsig Tdev Tutorial Guide v3.2|Version 3.2]]
|-
|[[Sbc Tutorial Guide v3.0|Version 3.0]]
|[[Tmedia Tsig Tdev Tutorial Guide v3.0|Version 3.0]]
|-
|
|
|-
|
|[[Web Portal Tutorial Guide v2.9|Version 2.9]]
|-
|

|}

 
<div class="mw-collapsible mw-collapsed" data-collapsetext="other versions" data-expandtext="Click here for other versions" style="width: 400px;">
 
*[[Tmedia Tsig Tdev Tutorial Guide v2.10|Version 2.10]]
*[[Web Portal Tutorial Guide v2.8|Version 2.8]]
*[[Web Portal Tutorial Guide v2.7|Version 2.7]]
*[[Web Portal Tutorial Guide v2.6|Version 2.6]]
*[[Web Portal Tutorial Guide v2.5|Version 2.5]]
*[[Web Portal Tutorial Guide v2.4|Version 2.4]]
*[[Web Portal Tutorial Guide v2.3|Version 2.3]]
*[[Web Portal Tutorial Guide v2.2|Version 2.2]]
</div>
 
== Use Cases ==
*[[Use_Cases:Network_Configuration_A|Network Configuration use cases]]

==Parameters==

Follow this link to learn about the parameters used by the Web Portal:

* [[:Category:Parameters|Parameters]]

[[Category:Gateway_OAM%26P|Web Portal]]
[[Category:Tdev_OAM%26P|Web Porta]]
[[Category:Tmonitor_OAM%26P|Web Porta]]
[[Category:Revise on Major]]

Main Page

2023-03-08T14:58:51Z

Abaum: just a test

'''Welcome to the TB Wiki!''' [http://www.telcobridges.com TelcoBridges] has developed this wiki to help you with your product and service questions.. 

'''Using TB Wiki'''

To access information, select a topic from one of the above product menus. You can also find information by entering your search criteria in the search box.
 
'''Note''': You can also search our wiki using google chrome. Enter '''site:docs.telcobridges.com [keywords]''' 

'''Disclaimer'''

The information on the TB Wiki web site is subject to change without notice. No part of this web site may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of TelcoBridges Inc. TelcoBridges may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this web site or associated documents. The furnishing of access to this web site does not give you license to these patents, trademarks, copyrights, or other intellectual property except as expressly provided in any written agreement from TelcoBridges.

The information provided in this web site is intended as a guide. No responsibility is implied and the terms of your agreement with TelcoBridges will continue to claim precedence. For the latest detailed engineering specifications, please contact TelcoBridges. TelcoBridges is committed to continually improving product designs, as a result, product specifications may be subject to change without notification.

'''Note''': TB Wiki is a living document, in which the presentation style and the content evolves over time.

'''Copyright'''

This web site and its contents, as well as any external links to content on TelcoBridges servers, are ©2002-2022 TelcoBridges Inc. All rights reserved

[[Classic_Page|Legacy Main Page]]

ProSBC:Restful API SIP Domain

2023-03-03T15:25:41Z

Abaum:

You can create and modify a SIP Domain in your system with RestFul API using JSON in the following format:

<pre>

{
"min_contact_expire": "30 seconds",
"max_contact_expire": "1 hour",
"enabled": true,
"routing_method": "Register Source",
"domain_name": "sip.telcobridges.com",
"advanced_parameters": {
"poll_registered_users_parameters": {
"***meta***": {
"valid_url": false
},
"poll_registered_users_interval": "20 seconds",
"poll_registered_users_user_agent": "",
"poll_registered_users": false
},
"unsubscribe_on_unregister": true,
"***meta***": {
"valid_url": false
},
"contact_expire_grace_time": "1 minute",
"strict_user_matching": false
},
"sip_registration_registrars": {},
"***meta***": {
"version": "3.1.137",
"src_path": ""
},
"naps": [
"3CX",
"OPEN_NAP"
],
"default_contact_expire": "1 hour",
"forwarding_parameters": {
"forwarding_mode": "Contact Remapping",
"***meta***": {
"valid_url": false
},
"forward_after_switchover": true,
"override_received_user_agent": false,
"max_simultaneous_register_forward": 10000,
"max_pending_register_forward": 10000,
"min_registrar_expire": "1 hour"
},
"name": "TEST_DOMAIN",
"unique_name": "sip.telcobridges.com",
"registration_method": "Forwarding",
"max_registered_users": 100000
}

</pre>

Important parameters in the JSON file

* [[Parameter: Name|name]]
* [[Parameter: Domain name|domain_name]]
* [[Parameter: Routing Method|routing_method]]
* [[Parameter: Forwarding Mode|forwarding_mode]]

==Adding a new SIP Domain==

You can add a new SIP Domain with the POST command:

POST http://ProSBCIP:12358/configurations/configuration_name//sip_registration_domains/

ProSBC will create a new SIP Domain from the name in the JSON file.

Example: Using the Postman tool, the URL is:

http://192.168.1.25:12358/configurations/config_2/sip_registration_domains/

[[Image:RestFul_sip_domain_Post_Send.png|800px| ]]

If the new SIP Domain is created successfully, the following message is returned:

[[Image:RestFul_sip_domain_Post_Response.png|800px| ]]

==Modifiying a SIP Domain==

You can modify the existing SIP Domain with the PUT command:

PUT http://ProSBCIP:12358/configurations/configurationname/sip_registration_domains/sip_domain_name

Example: Using the Postman tool, the URL is

http://192.168.1.25:12358/configurations/config_2/sip_registration_domains/TEST_DOMAIN and changed routing_method to Contact

[[Image:SIP_Domain_Put_Send.png|800px| ]]

If the update is successful, the following message is returned:

[[Image:SIP_Domain_Put_Response.png|800px| ]]

Learn more about how to use RestFul API and Postman Tool from the following link [[Northbound_interface:RESTful]].