Actions

Web Portal Tutorial Guide v2.6: Difference between revisions

No edit summary
 
(23 intermediate revisions by 5 users not shown)
Line 1: Line 1:
=Introduction=
{{DISPLAYTITLE:Tmedia, Tsig, and Tdev Web Portal 2.7 Tutorial Guide}}
__NOTOC__
 
Introduction
This guide is designed to provide users with a scenario-based approach to installing  [[Tmedia]] and [[Tdev]] systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).
This guide is designed to provide users with a scenario-based approach to installing  [[Tmedia]] and [[Tdev]] systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).




==Prerequisites==
'''Prerequisites'''
This document assumes that the [[Tmedia]] or [[Tdev]] devices are installed as described in their Quick Reference Guides, and in the case of the Tmedia system communication has been established with the control network.
This document assumes that the [[Tmedia]] or [[Tdev]] devices are installed as described in their Quick Reference Guides, and in the case of the Tmedia system communication has been established with the control network.


(Note: Tmedia devices are shipped with the Tmedia Web Portal pre-installed, while Tdev devices require that Toolpack be installed as described in the [[Tmedia_Installation#Tdev|Tdev installation guides]].)
 
('''Note''': Tmedia devices are shipped with the Tmedia Web Portal pre-installed, while Tdev devices require that Toolpack be installed as described in the [[Tmedia_Installation#Tdev|Tdev installation guides]].)
 


Furthermore, in the case of a Tdev device and the initial configuration of the [[Toolpack]] application server, the following will have been provided:
Furthermore, in the case of a Tdev device and the initial configuration of the [[Toolpack]] application server, the following will have been provided:
Line 17: Line 22:




==Key Concepts==
'''Key Concepts'''
*'''System:''' A system is defined as the complete solution that is designed for a network. If a system solution is comprised of 4 TMP6400’s and a TMS1600, then the combination of these TelcoBridges devices is termed a system.
*'''System:''' A system is defined as the complete solution that is designed for a network. If a system solution is comprised of 4 TMP6400’s and a TMS1600, then the combination of these TelcoBridges devices is termed a system.
*'''Hardware:''' Each TelcoBridges devices, whether it is a TMP6400, TMG3200, or TMS1600 is referred to as a hardware device or hardware adapter.
*'''Hardware:''' Each TelcoBridges devices, whether it is a TMP6400, TMG3200, or TMS1600 is referred to as a hardware device or hardware adapter.
*'''Line Interface:''' The physical TDM module installed on the TelcoBridges device is referred to as a line interface.
*'''Line Interface:''' The physical TDM module installed on the TelcoBridges device is referred to as a line interface.


== General Web Portal Applications ==


'''''IMPORTANT!''''' The Topics covered in the following table are common to <u>all</u> TMedia installations. Therefore, this section should be consulted before moving on to any other.  
'''''IMPORTANT!''''' The Topics covered in the following table are common to <u>all</u> TMedia installations. Therefore, this section should be consulted before moving on to any other.  


'''Topics covered here:'''


=System=


'''Access and User Management'''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Log-on and User Access Levels
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Web Portal Access
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Database Backup
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | User Access Levels
|-
|-
| valign="top" |  
| valign="top" |  
*[[Toolpack:Connecting to the Web Server and logging on to the web portal A|Connect to the web server and log on to the Web Portal]]  
*[[Toolpack:Connecting to the Web Server and logging on to the web portal A|Connect to the Web Portal]]  
| valign="top" |
*[[Toolpack:User access A|User Access]]  
*[[Toolpack:User access A|User Access]]  
**[[Toolpack:Viewing the User List A|Viewing the User List]]  
**[[Toolpack:Viewing the User List A|Viewing the User List]]  
Line 43: Line 48:
**[[Toolpack:Logging Off A|Logging Off]]  
**[[Toolpack:Logging Off A|Logging Off]]  
*[https://forums.telcobridges.com/viewtopic.php?f=12&t=248&p=1101&hilit=privilege#p1101 User privilege level]
*[https://forums.telcobridges.com/viewtopic.php?f=12&t=248&p=1101&hilit=privilege#p1101 User privilege level]
|}


'''Database Backup'''
{| cellpadding="5" border="1" class="wikitable"
|-
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Create Database Backup
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Restore Database
|-
| valign="top" |  
| valign="top" |  
*[[Toolpack:Database Backup A|Carrying out a First Database Backup]]
*[[Toolpack:Database Backup A|Carrying out a First Database Backup]]
*[[Toolpack:Downloading a Database Backup A|Downloading a Database Backup]]
*[[Toolpack:Downloading a Database Backup A|Downloading a Database Backup]]
| valign="top" |
*[[Toolpack:Uploading a Database Backup A|Uploading a Database Backup]]
*[[Toolpack:Uploading a Database Backup A|Uploading a Database Backup]]
*[[Toolpack:Restoring a Database Backup A|Restoring a Database Backup]]
*[[Toolpack:Restoring a Database Backup A|Restoring a Database Backup]]
|}


'''Configuration'''
{| cellpadding="5" border="1" class="wikitable"
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Activating a Configuration
|-
| valign="top" |
*[[Toolpack:Activating_the_Configuration A|Activating the Configuration]]
|}
|}


'''Minor Package Upgrade'''
{| cellpadding="5" border="1" class="wikitable"
|-
! width="200" style="background: none repeat scroll 0% 0% rgb(239, 239, 239); -moz-background-inline-policy: continuous;" | Installing a package
|-
| valign="top" |
*[[Toolpack:Downloading_a_Release_A|Retrieving a software release]]
*[[Toolpack:Uploading_a_Release_A|Uploading a software release]]
*[[Toolpack:Activating_a_Release_A|Activating a software release]]


 
|}


=Hardware=
=Hardware=


== New Hardware ==
'''New Hardware'''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 73: Line 102:
|}
|}


==TDM network==
'''TDM network'''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 88: Line 117:
|}
|}


==IP network==
'''IP network'''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 96: Line 125:
|-
|-
| valign="top" |  
| valign="top" |  
*[[Configuring IP Interfaces|IP Interfaces]]
*[[Toolpack:Configuring_VoIP_Interfaces A|Configuring VoIP Interfaces]]
| valign="top" |  
| valign="top" |  
*[[Toolpack:Creating_an_IP_Port_Range A|Create an IP port range]]
*[[Toolpack:Creating_an_IP_Port_Range A|Create an IP port range]]


|}
|}


=Protocol Stacks=
=Protocol Stacks=


==ISDN NFAS==
'''ISDN NFAS'''


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 140: Line 164:
|}
|}


===ISDN Advanced Features===
''ISDN Advanced Features''
 
<div class="mw-collapsible mw-collapsed" data-collapsetext="ISDN NFAS Overlap" data-expandtext="ISDN NFAS Overlap" style="width: 400px;">
<div class="mw-collapsible mw-collapsed" data-collapsetext="ISDN NFAS Advanced Features" data-expandtext="ISDN NFAS Advanced Features" style="width: 400px;">


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 154: Line 177:
<br><br>
<br><br>


==CASR2==
'''CASR2'''
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 179: Line 201:
|}
|}


==SIP==
'''SIP'''
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 208: Line 229:
|}
|}


===SIP Advanced Features===
''SIP Advanced Features''
<div class="mw-collapsible mw-collapsed" data-collapsetext="SIP Advanced Features" data-expandtext="SIP Advanced Features" style="width: 400px;">
 
{|
|STYLE="vertical-align: top"|
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | SIP-I SIP-T
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | SIP-I SIP-T
|-
|-
| valign="top" |
| valign="top" |
*[[Enabling_SIP_I_SIP_T_A|Enabling SIP-I SIP-T]]
*[[Enabling_SIP_I_SIP_T_A|Enabling SIP-I SIP-T]]
|}
|}
|STYLE="vertical-align: top"|
</div>
<div class="mw-collapsible mw-collapsed" data-collapsetext="SIP Spiral" data-expandtext="SIP Spiral" style="width: 400px;">
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | SIP Spiral
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | SIP Spiral
|-
|-
| valign="top" |
| valign="top" |
*[[Enabling_SIP_Spiral_A|Enabling SIP Spiral]]
*[[Enabling_SIP_Spiral_A|Enabling SIP Spiral]]
|}


|}
|STYLE="vertical-align: top"|
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 240: Line 256:
*[[Enabling_NAT_Traversal_A|Enabling NAT Traversal]]
*[[Enabling_NAT_Traversal_A|Enabling NAT Traversal]]
|}
|}
|}
</div>
<br>
==SS7 ISUP==
=== MTP2-MTP3-ISUP ===


'''SS7 ISUP'''


''MTP2-MTP3-ISUP''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 293: Line 304:
|}
|}


===M2PA-MTP3-ISUP===
''M2PA-MTP3-ISUP''
 
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 340: Line 349:
|}
|}


===M3UA-ISUP===
''M3UA-ISUP''
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 382: Line 390:
|}
|}


===SS7 Advanced Features===
'''SCCP-TCAP'''
<div class="mw-collapsible mw-collapsed" data-collapsetext="SS7 Advanced Features" data-expandtext="SS7 Advanced Features" style="width: 400px;">
{| cellpadding="5" border="1" class="wikitable"
|-
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Configuring SPIROU
|-
| valign="top" |
*[[Toolpack:Modifying_Profile_for_SPIROU A|Modifying Profile]]
*[[Toolpack:Modifying_Gateway_Configurations_for_SPIROU A|Modifying Gateway Configurations]]
*[[Toolpack:Modifying_ISUP_Stack_for_SPIROU A|Modifying ISUP Stack]]
*[[Toolpack:Modifying_ISUP_Userpart_for_SPIROU A|Modifying ISUP Userpart]]
*[[Toolpack:Optional_configurations_for_SPIROU A|Optional modifications]]
|}
 
</div>
 
==SCCP-TCAP==
 
 
===MTP2-MTP3-SCCP-TCAP===
 


''MTP2-MTP3-SCCP-TCAP''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"


Line 450: Line 439:
|}
|}


===M2PA-MTP3-SCCP-TCAP===
''M2PA-MTP3-SCCP-TCAP''
 
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 498: Line 485:
|}
|}


===M3UA-SCCP-TCAP===
''M3UA-SCCP-TCAP''
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 541: Line 527:
|}
|}


==H.248 MEGACO==
'''H.248 MEGACO'''


If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.
If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.
Line 547: Line 533:
If the Tmedia is used to connect media only, then you can go straight to [[#H.248|H.248 Configuration]]
If the Tmedia is used to connect media only, then you can go straight to [[#H.248|H.248 Configuration]]


===M2UA===
''M2UA''


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 578: Line 564:




===M3UA===
''M3UA''


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 616: Line 602:
|}
|}


===IUA===
''IUA''


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 1) <br>Create Line Interfaces
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 1) <br>Create Line Interfaces
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 2) <br>Create M2UA Configuration
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 2) <br>Create IUA Configuration
   
   
|-
|-
Line 639: Line 625:
|}
|}


===H.248===
''H.248''


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 683: Line 669:




=CDR=
=CDR (Call Detail Record)=
 
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
|-
|-
Line 692: Line 677:


| valign="top" |
| valign="top" |
*[[Text_cdr|Text CDR]]
*[[Toolpack:Enabling RADIUS A|Enabling CDR]]


| valign="top" |
| valign="top" |
Line 727: Line 712:
|}
|}


== Routing script ==
'''Routing script'''
TelcoBridges provides a wide variety of routing script examples which customers can apply directly in their web configuration according to their needs by following just a few simple steps. Please select one of the following examples according to your needs. You may modify it when necessary.
TelcoBridges provides a wide variety of routing script examples which customers can apply directly in their web configuration according to their needs by following just a few simple steps. Please select one of the following examples according to your needs. You may modify it when necessary.


Line 753: Line 738:
*[[Enable_Routing_Script_A|Enable routing script]]
*[[Enable_Routing_Script_A|Enable routing script]]
*[[Activate_Configuration_A|Activate configuration]]
*[[Activate_Configuration_A|Activate configuration]]
|}
|}


<div class="mw-collapsible mw-collapsed" data-collapsetext="Configuring Audio Prompts" data-expandtext="Audio Prompts" style="width: 400px;">


{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
Line 766: Line 748:
|}
|}


</div>
<br><br>


== Label Routing ==
''' Label Routing'''


This section assumes:
This section assumes:
Line 804: Line 784:
=Troubleshooting=
=Troubleshooting=


== Call trace ==
'''Call trace'''
{| cellpadding="5" border="1" class="wikitable"
{| cellpadding="5" border="1" class="wikitable"
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |Call trace
! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" |Call trace
Line 859: Line 839:
**[[Toolpack:Status_Menus:NAP Status List A|NAP Status List]]
**[[Toolpack:Status_Menus:NAP Status List A|NAP Status List]]
*[[Toolpack:Status_Menus:H.248 A|H.248]]
*[[Toolpack:Status_Menus:H.248 A|H.248]]
*[[Toolpack:Status_Menus:RADIUS A|RADIUS]]


|}
|}


 
<headertabs/>


[[category:Toolpack]]
[[category:Toolpack]]

Latest revision as of 15:53, 17 December 2021


Introduction This guide is designed to provide users with a scenario-based approach to installing Tmedia and Tdev systems, using the Web Portal configuration tool. This means that users must first go through the steps that are general to all installations, and subsequently follow the instructions that are specific to their particular application scenario (this corresponds to the type of service, and hardware system being set up).


Prerequisites This document assumes that the Tmedia or Tdev devices are installed as described in their Quick Reference Guides, and in the case of the Tmedia system communication has been established with the control network.


(Note: Tmedia devices are shipped with the Tmedia Web Portal pre-installed, while Tdev devices require that Toolpack be installed as described in the Tdev installation guides.)


Furthermore, in the case of a Tdev device and the initial configuration of the Toolpack application server, the following will have been provided:

  • The Tdev device to which the Web Portal will first connect.
  • The Tdev device will have been pre-configured with its physical TDM interface.
  • The serial number of the Tdev device will have been entered into the configuration file.
  • The application software for the Tdev device will have been pre-installed on the Toolpack application server, as described in the Tdev installation guides.

This document also assumes familiarity with topics, such as ISDN signaling, SIP signaling, SS7, CAS R2 signaling, and SIGTRAN signaling.


Key Concepts

  • System: A system is defined as the complete solution that is designed for a network. If a system solution is comprised of 4 TMP6400’s and a TMS1600, then the combination of these TelcoBridges devices is termed a system.
  • Hardware: Each TelcoBridges devices, whether it is a TMP6400, TMG3200, or TMS1600 is referred to as a hardware device or hardware adapter.
  • Line Interface: The physical TDM module installed on the TelcoBridges device is referred to as a line interface.


IMPORTANT! The Topics covered in the following table are common to all TMedia installations. Therefore, this section should be consulted before moving on to any other.


[edit]

New Hardware

Add telecom hardware Add TMS hardware Add 1+1 group

TDM network

(Step 1)
Allocate Physical Interfaces
System Clock

IP network

(Step 1)
IP Interfaces
Create an IP port range
[edit]

ISDN NFAS

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configure ISDN-PRI Signaling
(Step 3)
Modify NAP profile
(Step 4)
Configure Network Access Points (NAPs)

OR

ISDN Advanced Features

ISDN Overlap Sending



CASR2

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring a CAS R2 stack
(Step 3)
Modify NAP profile
(Step 4)
Configure Network Access Points (NAPs)

SIP

(Step 1)
Configure IP port range
(Step 2)
Configure SIP Signaling
(Step 3)
Configure Codecs and Tone Detection
(Step 4)
Modify NAP profile
(Step 5)
Configure Network Access Points (NAPs)

SIP Advanced Features

SIP-I SIP-T
SIP Spiral


NAT Traversal

SS7 ISUP

MTP2-MTP3-ISUP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the MTP2 Layer
(Step 3)
Configuring the MTP3 Layer
(Step 4)
Configuring the ISUP Layer
(Step 5)
Modify NAP profile
(Step 6)
Configure Network Access Points (NAPs)




M2PA-MTP3-ISUP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the M2PA Layer
(Step 3)
Configuring the MTP3 Layer
(Step 4)
Configuring the ISUP Layer
(Step 5)
Modify NAP profile
(Step 6)
Configure Network Access Points (NAPs)


M3UA-ISUP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the M3UA Layer
(Step 3)
Configuring the ISUP Layer
(Step 4)
Modify NAP profile
(Step 5)
Configure Network Access Points (NAPs)

SCCP-TCAP

MTP2-MTP3-SCCP-TCAP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the MTP2 Layer
(Step 3)
Configuring the MTP3 Layer
(Step 4)
Configuring the SCCP Layer
(Step 5)
Configuring the TCAP Layer (optional)




M2PA-MTP3-SCCP-TCAP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the M2PA Layer
(Step 3)
Configuring the MTP3 Layer
(Step 4)
Configuring the SCCP Layer
(Step 5)
Configuring the TCAP Layer (optional)


M3UA-SCCP-TCAP

(Step 1)
Allocate Physical Interfaces
(Step 2)
Configuring the M3UA Layer
(Step 3)
Configuring the SCCP Layer
(Step 4)
Configuring the TCAP Layer (optional)

H.248 MEGACO

If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.

If the Tmedia is used to connect media only, then you can go straight to H.248 Configuration

M2UA

(Step 1)
Create Line Interfaces
(Step 2)
Create MTP2 links
(Step 3)
Create M2UA configuration


M3UA

(Step 1)
Create Line Interfaces
(Step 2)
Create MTP2 links
(Step 3)
Create MTP3 configuration
(Step 4)
Create M3UA configuration

IUA

(Step 1)
Create Line Interfaces
(Step 2)
Create IUA Configuration

H.248

(Step 1)
Allocate Physical Interfaces
(Step 2)
Create IP Port Ranges
(Step 3)
Modify NAP profile
(Step 4)
Configure Network Access Points (NAPs)
(Step 5)
Configure Media Gateway for H.248 mode
(Step 6)
Add a New Media Gateway Controller
(Step 7)
Associate NAPs Resources to H.248 Configuration



[edit]

Static route

Add routes

Routing script TelcoBridges provides a wide variety of routing script examples which customers can apply directly in their web configuration according to their needs by following just a few simple steps. Please select one of the following examples according to your needs. You may modify it when necessary.

*Flexible NOA: Remap the Calling/Called NOA flexibly based on the routes. It should cover most of the NOA requests since the routes include the calling/called remapping as well.

*Prefix NOA: Remapp Calling/Called NOA according to the prefix of the calling/called number, manipulate calling/called number. For calling number, if it is a privacy call, use the number in P-Asserted-Identity line or Remote-Party-ID line as the calling number to remap the NOA and do the manipulation.

Flexible NOA Prefix NOA


Audio Prompts


Label Routing

This section assumes:

  • The routing script is already implemented (you just need to add the label routing functionality)
  • The routeset definition and digimap files are already created
Add label routing functionality
Update definition/digitmap files
[edit]

Call trace

Call trace
[edit]

The Web Portal configuration tool will guide you through a number of status menus, each of which indicate the current state of a certain hardware service (assuming said service has been configured). The following table contains the general conventions of the Web Portal's display (A), as well as a variety of specific status menus (B).


(A)
Menus Overview
(B)
Individual Menu Descriptions