Applies to version(s): v3.0 and above
This configuration is a standard M3UA Application Server Process (ASP)
Configure IP Interface
|
Configure SCTP
|
Configure MTP3 Point Codes
|
Configure M3UA
|
Configure ISUP
|
Configure NAP
|
- Configure IP Interface
- In this use case, configured as:
- IP Address: 192.168.0.99
- Netmask: 255.255.255.0
- Gateway: 192.168.0.1
|
|
- Configure MTP3 Point Codes
- In this use case, the following point code names are assigned:
- destination point code: dpc333
- origination point code: opc111
|
- Configure M3UA
- M3UA Mode: ASP
- Create an M3UA SAP
- Create an M3UA Network
- Create an M3UA User Part
- Create an M3UA Peer Signaling Process
- Remote type: SGP
- Remote IP/Port for M3UA of SGP
- Create an M3UA Peer Server
- In this use case, Two peer servers are needed: one local and one remote
- Create an M3UA Route
- In this use case, two M3UA routes are needed:
- Local Route: Psrv, opc111, Local peer server, M3UA Userpart, subservice=NONE
- Route towards SGP: Psrv, Remote peer server, dpc333, M3UA Userpart=NONE, subservice=NONE
|
|
|