Use Cases:Configuring Tmedia Gateways for M3UA SGSG Passthrough: Difference between revisions

Revision as of 16:19, 14 July 2021

Configure MTP2	Configure MTP3	Configure IP Interface	Configure M3UA
Configure MTP2 Configure MTP2 Link In this use case, one MTP2 link is needed, but more are supported	Configure MTP3 In this use case, MTP3 mode: SP Advanced Parameters -> SG Passthrough mode: True Configure an MTP3 Network Configure MTP3 Point Codes In this use case, the following point code names are assigned: origination point code (OPC): PC_B1 destination point code (DPC): PC_A1 Configure an MTP3 Linkset In this use case, there is one linkset: OPC: PC_B1, DPC: PC_A1 Configure MTP3 Links Configure an MTP3 Route In this use case, there are two routes needed: One local route towards Customer switch (PC_A1) One route towards M3UA (PC_B1)	Configure IP Interface In this use case, configured as: IP Address: 192.168.0.55 Netmask: 255.255.255.0 Gateway: 192.168.0.1	Configure SCTP Configure M3UA In this use case, Advanced Parameters -> Link status relay: True Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process In this use case, configured as: Remote IP/Port for M3UA of STP/SGP Create an M3UA Peer Server In this use case, Two peer servers are needed: one local and one remote Create an M3UA Route In this use case, two M3UA routes are needed: Route towards SGP: Psrv, PC:0.0.0 mask, M3UA peer server configured above Route towards Customer switch: MTP3, PC:0.0.0 mask, M3UA Userpart

@@ Line 14: / Line 14: @@
 ! width="400" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure MTP3
 ! width="400" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure IP Interface
-! width="400" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure SCTP
 ! width="400" style="background: none repeat scroll 0% 0% rgb(0, 83, 139);" | Configure M3UA
 |-style="vertical-align:top;"
@@ Line 23: / Line 22: @@
 |
 *[[Toolpack:M3UA_Use_Case_A:Configure_MTP3_A|Configure MTP3]]
+**In this use case,
+*** MTP3 mode: SP
+*** Advanced Parameters -> SG Passthrough mode: True
 *[[Toolpack:M3UA_Use_Case_A:Configure_MTP3_Network_A|Configure an MTP3 Network]]
 *[[Toolpack:M3UA_Use_Case_A:Configure_SS7_Point_Codes_A|Configure MTP3 Point Codes]]
@@ Line 45: / Line 47: @@
 |
 *[[Toolpack:M3UA_Use_Case_A:Configure_SCTP_A|Configure SCTP]]
-|
 *[[Toolpack:M3UA_Use_Case_A:Configure_M3UA_A|Configure M3UA]]
-** In this use case, Advanced Parameters:
+** In this use case,
-***Link status relay: True
+***Advanced Parameters -> Link status relay: True
 *[[Toolpack:M3UA_Use_Case_A:Creating an M3UA SAP (IPSP) C|Create an M3UA SAP]]
 *[[Toolpack:M3UA_Use_Case_A:Creating an M3UA Network (IPSP) C|Create an M3UA Network]]